CR-33S3C-T Teledyne

Standard SMA Connectors Elite CR-33 Miniature DC-22GHz SPDT Switch Failsafe The CR-33 Switch is a broadband, SPDT, electromechanical, coaxial switch designed to switch a microwave signal from a common input to either of two outputs. The CR-33 Series has a higher operting Frequency and temperature range than the commercial CCR-33 se- ries. The characteristic impedance is 50 Ohms. The switches are small with connector spac- ing compatible with SMA connectors. The CR-33 series switch is offered with either a failsafe or latching actuator. This design is compatible with the two most common mounting hole patterns. The CR-33 series switch is interchange- Specifications able with a variety of switches. RF Contacts: Break before make O Actuator Voltage (VDC) 20 C 12 15 28 Current (mA) 200 160 90 Switching Time: 20 msec max Connectors: SMA (f) Weight: 1.65 oz. max O O Temperature Range: -55 C to +85 C (Operating) Shock: MIL-STD-202 Method 213, Condition D (500G Non Operating) Vibration: MIL-STD-202 Method 214, Condition D (10G RMS Non Operating) Humidity: Moisture Seal Available O MTBF: 7.3 Million Hours ( MIL-HDBK-217F Fixed, 25 C, <1 Cycle per hour) RF Power Handling 3000 Typical Performance 800 400 200 15 80 25 40 0.01 22.0 Frequency GHz 10 0.1 1.0 4.0 10 18 22 Frequency GHz 0.0 0.4 Specifications DC-6 GHz 6-12 GHz 12-18 GHz 18-22 GHz 60 70 VSWR (max) 1.25:1 1.40:1 1.50:1 1.60:1 80 Insertion Loss (min) 0.20 dB 0.40 dB 0.50 dB 0.60 dB Isolation (max) 70.0 dB 60.0 dB 60.0 dB 50.0 dB 90 0.01 22.0 Frequency GHz Specifications subject to change without notice. www.teledynecoax.com email: coax teledyne.com Tel: (800) 351-7368 10/2007 Power CW (Watts) Return Loss IL dB Isolation dBElite CR-33 Miniature DC-22GHz SPDT Switch Failsafe Analog Indicators TTL H = 1.30 MAX. STD MODEL H = 1.80 MAX. TTL MODEL H = 1.30 MAX. STD MODEL H = 1.80 MAX. TTL MODEL Optional Narrow Width Body Standard Width Body Part Numbering System for CR-33 (Failsafe) CR-33 S 1 O - N Series Options Connectors Actuator Type Actuator Voltage Connector Actuator Voltage Actuator Type Options S: SMA Female 1: 28Vdc Failsafe O: No Indicator Contacts T: TTL Drivers with Diodes 2: 15Vdc Failsafe C: Indicator Contacts N: Narrow Body 3: 12Vdc Failsafe R: Positive + Common For other options contact Factory Specifications subject to change without notice. www.teledynecoax.com email: coax teledyne.com Tel: (800) 351-7368 10/2007