CR-38S14C Teledyne

Standard SMA Connectors Commercial CCR-38 Multi-Throw DC-18GHz Normally Open The CCR-38 Switch is a broadband, multi-throw, electromechanical coaxial switch designed to switch a microwave signal from a common input to any of 3, 4, 5, or 6 outputs. The characteristic impedance is 50 Ohms. The switches are small using the popular connector spacing on a 1.062 dia. circle. Each position has an individual actuator mechanism allowing random position selection. This also gives the minimum switching time. Specifications With the normally open actuator, all paths are open when the switch is de-energized. RF Contacts: Break before make O Actuator Voltage (VDC) 20 C 12 15 28 Current (mA) 170 136 140 Switching Time: 15 msec max Connectors: SMA (f) Weight: 6 oz. max O O Temperature Range: -40 C to +65 C (Operating) Shock: MIL-STD-202 Method 213, Condition D (500G Non Operating) Vibration: MIL-STD-202 Method 214, Condition D (10G RMS Non Operating) Humidity: Moisture Seal Available O MTBF: 6.5 Million Hours ( MIL-HDBK-217F Fixed, 25 C, <1 Cycle per hour) RF Power Handling 3000 Typical Performance 800 400 200 15 80 25 40 0.01 18.0 Frequency GHz 10 0.1 1.0 4.0 10 18 Frequency GHz 0.0 0.4 Specifications DC-6 GHz 6-12 GHz 12-18 GHz 60 70 VSWR (max) 1.25:1 1.40:1 1.50:1 80 Insertion Loss (min) 0.20 dB 0.40 dB 0.50 dB Isolation (max) 70.0 dB 60.0 dB 60.0 dB 90 18.0 0.01 Frequency GHz Specifications subject to change without notice. www.teledynecoax.com email: coax teledyne.com Tel: (800) 351-7368 10/2007 Power CW (Watts) Return Loss IL dB Isolation dBCommercial CCR-38 Multi-Throw DC-18GHz Normally Open Analog Indicators TTL H = 1.75 STD Model H = 2.50 TTL Model SP3T SP4T SP5T SP6T Part Numbering System for CCR-38 (Normally Open) CCR-38 S 1 5 O - T Series Options Connectors Actuator Type Actuator Voltage Number of Switch Positions Connector Actuator Voltage Number of Actuator Type Options S: SMA Female 1: 28Vdc Normally Open Positions O: No Indicator Contacts T: TTL Drivers with Diodes 2: 15Vdc Normally Open 3: SP3T C: Indicator Contacts R: Positive + Common 3: 12Vdc Normally Open 4: SP4T TD: TTL Driver with Decoder 5: SP5T For other options contact Factory : Stock item subject to prior sale 6: SP6T Specifications subject to change without notice. www.teledynecoax.com email: coax teledyne.com Tel: (800) 351-7368 10/2007