Series QB00FM Optically Isolated Bi-Directional & DC Output Bi-Directional Solid-State Relay Part Number* Relay Description QB00FM 7.5A 150Vdc Output ,Solid State Relay * The Y suffix denotes parameters tested to MIL-PRF-28750 specifications. The W suffix denotes parameters tested to Teledyne specifications. ELECTRICAL SPECIFICATIONS (-55C TO +105C Ambient Temperature Unless Otherwise Specified) INPUT (CONTROL) SPECIFICATION FEATURES (See Fig. 1 and Note 1) Min Max Units High voltage output Input Current V = 6 Vdc 38 mAdc IN Low ON resistance Turn-Off Voltage (Guaranteed Off) 1.5 Vdc Power FET output Optical isolation Turn-On Voltage (Guaranteed On) 4.5 Vdc Fast switching speed Reverse Voltage Polarity -16 Vdc High surge current capability Capable of DC or bi-directional DC Input Supply Range (See Fig. 2 and Note 1) 4.5 16 Vdc switching (AC) Parameters tested utilizing MIL-PRF- OUTPUT (LOAD) SPECIFICATIONS 28750 test methods Bi-directional Configuration (See Fig. 1) Min Max Units APPLICATIONS Load Current (See Fig. 3) (No Heat Sink) 4.3 Adc Ideal for Automatic Test Equipment (ATE) Leakage Current High voltage systems V = 150 Vdc (25C) 10 Adc LOAD High-speed switching with low EMI V = 150 Vdc (105C) 100 Adc LOAD Squib Fire Output Voltage Drop 4.3A 0.7 Vdc DESCRIPTION Continuous Operating Output Voltage 150 Vdc The QB00FM relay is an advanced solid- Transient Blocking Voltage (See Note 3) 180 Vdc state bi-directional relay designed for high-speed power switching applications. ON Resistance R (on) at T = 25C 0.10 Ohm ds J This relay utilizes state-of-the-art I = 100 mAdc (See Fig. 4 and Note 4) LOAD solid-state circuit technology and manufacturing techniques to provide high Turn-On Time (See Fig.5) 7.5 ms reliability, low life cycle cost and Turn-Off Time (See Fig. 5) 2.0 ms exceptional switch performance. The QB00FM is capable of switching AC or dV/dt +25C 100 V/s DC power. The three output terminals can be configured for DC switching with Output Capacitance at 25 Vdc, 100 KHz 1600 pF ON resistance reduced to 25 milliohms and a current rating of 7.5A continuous. Other features include optical coupling to minimize EMI generation and to protect logic circuits from output voltage transients. The QB00FM is packaged in a hermetically sealed low profile package suitable for heat sink or circuit card mounting. Pin 6 is connected to the case for additional safety shielding. QB00FM 94 SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE 2002 TELEDYNE RELAYS QB00FB 072002 Q1Series QB00FM OUTPUT (LOAD) SPECIFICATIONS MECHANICAL SPECIFICATIONS DC Configuration (See Fig. 1 and Notes 2 & 6) Min Max Units Load Current (See Fig. 3) (No Heat Sink) 7.5 Adc Leakage Current V = 150 Vdc (25C) 20 Adc LOAD Leakage Current V = 150 Vdc (105C) 200 Adc LOAD Output Voltage Drop 7.5A 0.45 Vdc Continuous Operating Load Voltage 150 Vdc Transient Blocking Voltage (See Note 3) 180 Vdc ON Resistance R (on) at T = 25C 0.035 Ohm ds J I = 100 mAdc (See Fig. 4 and Note 4) LOAD Turn-On Time (See Fig.5) 8.5 ms Weight: 25g (max) Turn-Off Time (See Fig. 5) 2.0 ms Case: 6 pin, hermetically sealed Pins: Plated, gold Output Capacitance at 25 Vdc, 100 KHz 3200 pF Tolerances: OUTPUT (LOAD) SPECIFICATIONS .XX 0.015 .XXX 0.010 All Configurations Min Max Units ANGLE 1/2 Input to Output Capacitance 10 pF DIMENSIONS ARE SHOWN IN INCHES Dielectric Strength 500 Vac (MILLIMETERS) 9 Insulation Resistance 500 Vdc 10 Ohm Junction Temperature 125 C I = I LOAD max rated BLOCK DIAGRAM Thermal Resistance Junction to Ambient, ( )30 C/W JA Thermal Resistance Junction to Case, ( ) 2.0 C/W JC ENVIRONMENTAL SPECIFICATIONS All Configurations Min Max Units Temperature Range Operating -55 +105 C Storage -55 +125 C Vibration (102,000 Hz) 100 g Constant Acceleration 5000 g Shock (0.5 ms) 1500 g 2002 TELEDYNE RELAYS (800) 284-7007 www.teledynerelays.com QB00FM 95 QB00FM 072002 Q1