Series PVT322PbF Microelectronic Power IC HEXFET Power MOSFET Photovoltaic Relay Dual Pole, Normally Open, 0-250V, 170mA AC/DC General Description Features The PVT322 Series Photovoltaic Relay is a HEXFET Power MOSFET output dual-pole, normally open solid-state relay that Bounce-free operation can replace electromechanical relays in many I/O isolation 4,000 V RMS applications. It utilizes International Rectifiers Linear AC/DC operation HEXFET power MOSFET as the output switch, Solid-State Reliability driven by an integrated circuit photovoltaic UL recognized and BABT certified generator of novel construction. The output switch is controlled by radiation from a GaAlAs light emitting diode (LED) which is optically isolated from the photovoltaic generator. Series PVT322 Relays are packaged in an 8-pin, molded DIP package with either thru-hole or surface mount (gull-wing) terminals. It is available in standard plastic shipping tubes or on tape-and-reel. Please refer to Part Identification information opposite. Applications On/Off Hook switch Tip and Ring Line switching General switching Part Identification PVT322PbF thru-hole PVT322SPbF Surface-mount PVT322S-TPbF Surface-mount, Tape and Reel (HEXFET is the registered trademark for International Rectifier Power MOSFETs) 1 2016-08-29 Series PVT322PbF Electrical Specifications (-40C T +85C unless otherwise specified) A INPUT CHARACTERISTICS Limits Units Minimum Control Current (See figure1) 2.0 mA Maximum Control Current for Off-State Resistance T=+25C 0.4 mA A Control Current Range (Caution: current limit input LED, see figure 5) 2.0 to 25 mA Maximum Reverse Voltage 6.0 V OUTPUT CHARACTERISTICS Limits Units Operating Voltage Range 0 to 250 V (DC or AC peak) Maximum Load Current T =+40C A 170 mA 5mA Control (See figure 1) (single and dual channel operation) Maximum Peak Load Current (10ms maximum duration) 500 mA (single and dual channel operation) Maximum On-State Resistance T =+25C A 10 For 50mA Pulsed load, 5mA Control (see figure 3) Maximum Off-State Leakage T =+25C, 250V (see figure 4) 1.0 A A Maximum Turn-On Time T =+25C (see figure 6) A 3.0 ms For 50mA, 100 V load, 5mA Control DC Maximum Turn-Off Time T =+25C (see figure 6) A 0.5 ms For 50mA, 100 V load, 5mA Control DC Maximum Output Capacitance 50V 50 pF DC GENERAL CHARACTERISTICS Limits Units Minimum Dielectric Strength, Input-Output 4000 V RMS Minimum Dielectric Strength, Pole-to-Pole 1000 V DC 12 Minimum Insulation Resistance, Input-Output, T =+25C, 50%RH, 100V 10 A DC Maximum Capacitance, Input-Output 1.0 pF Maximum Pin Soldering Temperature (10 seconds maximum) +260 Ambient Temperature Range: Operating -40 to 85 C Storage -40 to 100 International Rectifier does not recommend the use of Connection Diagram this product in aerospace, avionics, military or life support applications. Users of this International Rectifier product in such applications assume all risks of such use and indemnify International Rectifier against all damages resulting from such use. 2 2016-08-29