RF700-12 Teledyne

Series RF700/RF703 DPDT Non-Latching Electromechanical Relay DC-4 GHz HIGH REPEATABILITY, TO-5 RELAYS DPDT SERIES RELAY TYPE RF700 Repeatable, RF relay RF703 Sensitive, repeatable, RF relay DESCRIPTION Uniframe motor design provides high magnetic The ultraminiature RF700 and RF703 relays are efficiency and mechanical rigidity designed to provide improved RF signal switching Minimum mass components and welded repeatability over the frequency range. These relays are construction provide maximum resistance to shock engineered for use in RF attenuator, RF switch matrices, and vibration ATE and other applications that require dependable Advanced cleaning techniques provide maximum high frequency signal fidelity and performance. assurance of internal cleanliness Hermetically sealed The RF700 and RF703 feature: Solder Dipped Leads, (RoHS compliant solder High repeatability option available) Broader bandwidth Metal enclosure for EMI shielding The Series RF700D/RF703 relays have internal High isolation between control and signal paths discrete silicon diodes for coil suppression and High resistance to ESD polarity reversal protection. This hybrid package reduces required PC board floor space by reducing The following unique construction features and the number of external components needed to drive manufacturing techniques provide excellent the relay. robustness to environmental extremes and overall high reliability: ENVIRONMENTAL AND PHYSICAL SPECIFICATIONS Storage 55C to +85C Temperature (Ambient) Operating 45C to +65C Vibration 10 gs to 500 Hz (General Note I) Shock 30 gs, (General Note I) 6ms half sine Enclosure Hermetically sealed RF700 0.09 oz. (2.55g) max. Weight RF703 0.16 oz. (4.5g) max. 2019 TELEDYNE RELAYS (800) 284-7007 www.teledynerelays.com RF700/RF703 Page 1 RF700RF703 112019 Q4Series RF700/RF703 DPDT Non-Latching Electromechanical Relay DC-4 GHz SERIES RF700/RF703 TYPICAL RF CHARACTERISTICS (See RF Notes) Isolation Across Contacts (RF Note 4) Isolation Pole to Pole (RF Note 5) Insertion Loss (RF Note 6) VSWR (RF Note 6) RF700/RF703 Time Response (RF Note 6) RF NOTES 1. Test conditions: a. Fixture: .031 copper clad, reinforced PTFE, RT/duroid 6002 with SMA connectors. (RT/duroid is a registered trademark of Rogers Corporation.) b. Room ambient temperature. c. Terminals not tested were terminated with 50-ohm load. d. Contact signal level: 10 dBm. e. No. of test samples: 4. 2. Data presented herein represents typical characteristics and is not intended for use as specification limits. 3. Data is per pole, except for pole-to-pole data. 4. Data is the average from readings taken on all open contacts. 5. Data is the average from readings taken on poles with coil energized and de-energized. 6. Data is the average from readings taken on all closed contacts. 7. Test fixture effect de-embedded from frequency and time response data. RF700/RF703 Page 2 SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE 2019 TELEDYNE RELAYS RF700RF703 112019 Q4