Waterproof ExStik II Dissolved Oxygen Meter/Kit Easy to replace screw on membrane cap For fast replacement and operation. Extension cable and weighted probe guard included with the Kit Features: Convenient kit adds versatility on measuring Dissolved Oxygen in laboratories or out in the field with a 16ft (5m) extension cable and probe weight guard for taking easy measurements in tanks or streams Oxygen level displayed as % Saturation from 0 to 200.0% or Concentration from 0 to 20.00ppm (mg/L) Adjustable Altitude Compensation (0-20,000ft in 1,000ft increments) Adjustable Salinity Compensation from 0 to 50ppt Analog bargraph indicates trends Memory stores up to 25 data sets with DO and Temperature reading Self calibration on power up Data Hold, Auto power off, Low battery indicator Waterproof to IP57 Optional 3 ft (1m) or 16ft (5m) extension cable with probe weight. DO600 meter includes DO electrode, protective sensor cap, spare membrane cap, electrolyte, four 3V CR-2032 batteries, and 48 (1.2m) neckstrap. See image on right for DO600-K Kit information. Sample testing with Sample testing with the meter Choice of optional 3ft (1m) extension cable attached in a laboratory environment or 16ft (5m) extension cable DO600-K Kit includes DO600 meter, to meter with probe weight DO603 membrane kit, 16ft (5m) extension cable, weighted probe guard, and hard cary- ing case 125 savings Specifications Range Max Resolution Basic Accuracy Extension cable attached Bonded membrane cap DO603 Membrane Kit includes DO (saturation mode) 0 to 200.0% 0.1% 2% FS to meter for easy replacement 6 screw on membrane caps, DO (concentration mode) 0 to 20.00ppm (mg/L) 0.01ppm (mg/L) 0.4ppm (mg/L) 15mL filling solution and Temperature 32 to 122F (0 to 50C) 0.1F/C 1.8F (1C) polishing paper Dimensions 1.4x6.9x1.6 (36x176x41mm) Weight 3.8oz (110g) Ordering Information: DO600 ..............ExStik II Dissolved Oxygen Meter DO600-K ..........ExStik II Dissolved Oxygen Kit DO610 ..............ExStik II DO/pH/Conductivity Kit DO603 ..............Membrane Kit for DO600 and DO605 DO605 ..............Spare ExStik II Dissolved Oxygen Electrode module EX010 ..............Extension Cable, 3ft (1 Meter) with probe weight for ExStik EX050 ..............Extension Cable, 16ft (5 Meter) with probe weight for ExStik CA895 ..............Carrying case, Small with Belt Loop CA903 ..............Carrying case for ExStik kit Specifications subject to change without notice. 6/2/08 - R1 www.extech.com Copyright 2008 Extech Instruments Corporation. All rights reserved including the right of reproduction in whole or in part in any form.X-ON Electronics Largest Supplier of Electrical and Electronic Components Click to view similar products for Environmental Test Equipment category: Click to view products by Teledyne FLIR / Extech manufacturer: Other Similar products are found below : CW40 F150C10E3DRT F150LTC20 F150CD10E2 F150L75 F150LRS 2837806 4328074 4366444 S-11 382153 700PTP-1 GEO- CABLE-REEL-50M H115 H300 F150-SLC50 AW-CO-1000 AW-H2S-100 AW-NmHc-100 ES1-CO-1000-01 P 2801 P 2802 TM-197 ULD-420-EUR TM-192D TM-305U TM-414 UT309C EL-P-TC-T-SURFACE 1500000059 HS115 MR59 12227021 13123602 13123661 12255930 12983030 30171091 30198712 30198755 30209323 12228657 12229067 12230090 7358958 12231398 12231487 7390674 7390682 12231550