EX845 Teledyne FLIR / Extech

CAT IV 1000A Clamp Meter + IR Thermometer Bluetooth Transmitter with METERLiNK Wirelessly transmits Voltage and Current readings to your FLIR high-definition infrared camera to incorporate meter readings with thermal images Features: METERLiNK frees the Thermographer Built-in non-contact IR Thermometer design from the manual process of with laser pointer collecting field data METERLiNK Wireless communication with FLIR Thermal Imaging Cameras (b60, i60, B-Series, and T-Series) CAT IV safety rating for industrial applications True RMS Current and Voltage measurements Peak hold captures inrush currents and Transients 1.7 (43mm) jaw opening for conductors up to Infrared cameras quickly locate problems with electrical equipment 750MCM or two 500MCM 4000 count backlit display Autoranging with manual range button Data Hold, Min/Max and Auto Power off Complete with CAT IV test leads, 9V battery, general purpose Type K probe, pouch case, and Professional Test Lead Set Collecting current measurements and associating them with the right component identified on an infrared image, can be a complicated and cumbersome process CAT IV -600V safety rating for added Built-in IR Thermometer with laser protection and True RMS feature gives pointer is an excellent troubleshooter for Manual data collection results in unnecessary complexity and risk. METERLiNK eliminates this you accurate readings of non-sinusoidal locating hot spots and overheating motors. Patented problem by allowing the thermographer to quickly waveforms. take a current reading on an electrical target and associate those readings with the corresponding targets stored in an infrared image Specifications Range Basic Accuracy AC/DC Current 0.1 to 1000A 2.8% AC/DC Voltage 0.1mV to 1000V AC: 1.5% DC: 2.8% Resistance 0.1 to 40M 1.5% Professional Test Leads: Capacitance 0.001nF to 40,000F 3.0% 8-Piece Professional Test Lead set Frequency 0.001kHz to 4kHz 1.5% Two 42 (1m) PVC lead extensions with shrouded banana plugs at both ends IR Temperature -58 to 518F (-50 to 270C) 2.0% rdg or 4F/2C Type K Temperature -4 to 1400F (-20 to 760C) (3%rdg+9F/5C) Two modular 4 (102mm) Heavy Duty test probe handles with 0.16 (4mm) banana plug tip Continuity Yes Two standard size, alligator clips with insulated rubber boot Inrush Yes Two extra large, double-insulated, alligator clips with sharp Diode Yes teeth for piercing insulated wire. Jaws open to 0.8 (20mm) Dimensions/Weight 10.6x4.3x2 (270x110x50mm)/ 13.6oz (386g) Ordering Information: EX845 ..................1000A AC/DC True RMS Clamp/DMM+IR Thermometer Specifications subject to change without notice. 1/19/12 - R1 www.extech.com Copyright 2011 Extech Instruments Corporation. All rights reserved including the right of reproduction in whole or in part in any form.