USB-C100 / C101 Turn-Key Module for USB-C Connected Headphones & Headsets Tempo Semiconductor, Inc. Applications The USB-C100 / C101 Modules are the absolute simplest conversion path for ANY Tier 1, Tier 2, or Tier 3 ODM or OEM to convert their current 3.5mm Headphones or Headsets designs that are Android-compatible with 1 or 3-button resistor-ladder network solutions into a fully functional all-digital USB-C connected solution with sup- port for the following functions REGARDLESS of a devices operating system. Near Universal Operating System Support Android 7.0 and later macOS X 10.0.0 and later Microsoft Windows CE, XP, Vista, 7, 8, 8.1, 10 and later Any modern Linux distribution (Kernel 2.73) and later Features Functions for 1-button or 3-button* Android-compliant Headsets as indicated below via: Volume Up (volume up button)* Volume Down (volume down button) * Pause / Play / Answer / Hangup (single short press of Pause / Play button) Voice Assistant OK Google, Hey Bixby, Hi Cortana (long press of Pause / Play button) Skip from Current Track to Next Track (quick double press of Pause / Play button) Scan Current Track Forward (quick press of Pause / Play button followed by long press) Skip Current Track to Previous Track (quick triple press of Pause / Play button) Scan Current Track Forward (quick double press of Pause / Play button followed by long press) 24-bit stereo digital audio playback and audio capture capability at 48kHz Supports high-resolution telephony sessions Integrated support for low-cost resistor ladder networks three button interface Simplest and fastest time-to-market solution available Pre-programmed USB Audio Bridge with no coding required Zero development time Secure bootloader ensures there is no possible way to load any sort of malware / virus / trojan / spyware / etc. via USB-C port TSCS25xx low-power 32-bit Stereo Audio Codec with integrated ground-center referenced HP amplifier Lowest measured power for any equivalent performance & feature solution on the market3.5mm Headphone or Headset Conversion / USB-C Headphone or Headset Design Process Cut the 3.5mm jack from current Heaphone or Headset and exposes all four of the wires. Solder these 4 wires to the respective soldering pads (Left, Right, Ground, Mic - from top to bottom) on the USB-C100 / USB-C101 module as shown in the picture to the left. Cover USB-C100 / USB-C101 module and secure wire with stress relief in plastic, rubber or non-static material. Technical Details Tempo Semiconductor TSCS25xx - Low-Power Audio Codec - 96kHz / 32-bit with integrated 24-bit signal processing engine 32-bit, 90dB SNR ADC / 96kHz-capable enables support for external analog mems mic for telephony support 32-bit DAC, 96kHz-capable, with a combined capless HP amplifier with 124dB SNR Ultra-low-latency ensures optimal A/V sync performance for all applications and mobile or VoIP-based calls Complimentary Android App enables customization of a wide variety of DSP audio enhancements with end-user personalization capability inside the app (USB-C101 module only) Where to Buy The USB-C100 and USB-C101 turn-key modules are currently sampling directly from the factory. Please contact sales temposemi.com to request product pricing & samples. The modules are available in mass-production quantities with 8-week leadtimes. *Note: The USB-C100 / USB-C1010 modules have been designed to meet the exacting needs of customers that are looking to replace the same level of functionality their 3.5mm headphones or 3.5mm Android-compatible headsets with either 1, 2, or 3 buttons that meet the following spec- ification: