72-2640 Tenma

TM 3 Channel DC Power Supply Features: Complete digital control / programmable 10mV / 1mA resolution Low noise and ripple CV / CC constant voltage and constant current modes 5 sets of parameters can be stored and recalled 100 sets of stored parameters inside for programmable recall The remote measurement terminal compensates the voltage drop of the wire Industrial grade, with load for a long time Specifications: Voltage Range / Current Range 0 - 30V / 0 - 5A 2, 5V / 3A 1 Load Regulation Voltage : 0.01% +2mV / Current : 0.02% +5mA Line Regulation Voltage : 0.01% +3mV / Current : 0.01% +3mA Setup Resolution Voltage : 10mV / Current : 1mA Setup Accuracy (25C 5C) Voltage : 0.5% +20mV / Current : 0.5% +15mA Ripple(20hz - 20M) Voltage : 1.5mVrms / Current: 3mArms Temperature Coefficient Voltage : 0.1% +10mV / Current : 0.1% +5mA Read Back Accuracy Voltage : 10mV / Current : 1mA Read Back Temp. Coefficient Voltage : 100ppm +10mV / Current : 100ppm +5mA Reaction Time (10% Rated load) Voltage Rise : 100mS / Voltage Drop : 100mS (10% Rated load) Indoor use Altitude: 2,000m Operation Environment Ambient temperature 0 to 40C Relative humidity 80% Weight and Dimension 9.2kg / 220mm(W) 156mm(H) 260mm(D) Ambient temperature -10C ~ +70C Storage Environment Relative humidity 70% Accessories User manual, Power cord (1.2meters) Part Number Table Description Part Number 3 Channel DC Power Supply 72-2640 Important Notice : This data sheet and its contents (the Information) belong to the members of the Premier Farnell group of companies (the Group) or are licensed to it. No licence is granted for the use of it other than for information purposes in connection with the products to which it relates. No licence of any intellectual property rights is granted. The Information is subject to change without notice and replaces all data sheets previously supplied. The Information supplied is believed to be accurate but the Group assumes no responsibility for its accuracy or completeness, any error in or omission from it or for any use made of it. Users of this data sheet should check for themselves the Information and the suitability of the products for their purpose and not make any assumptions based on information included or omitted. Liability for loss or damage resulting from any reliance on the Information or use of it (including liability resulting from negligence or where the Group was aware of the possibility of such loss or damage arising) is excluded. This will not operate to limit or restrict the Groups liability for death or personal injury resulting from its negligence. Tenma is the registered trademark of the Group. Premier Farnell plc 2012. TM www.element14.com www.farnell.com www.newark.com www.cpc.co.uk www.mcmelectronics.com Page <1> 10/06/15 V1.0X-ON Electronics Authorized Distributor Click to view similar products for Bench Top Power Supplies category. Click to view products by Tenma manufacturer. Other Similar products are found below : 9121A 9123A PR30 9805 1320 1420 1710A 1760A 1788 NL200 9115 9117 9150 9205 1902B220V 380820 Z1008U Z1040U Z1072LANU Z320065U Z3202U Z6035U Z650125U ZUP2010 ZUP2040U