Digital-Control and Programmable DC Power Supply Models: 72-2685, 72-2690, 72-2695, 72-2700, 72-2705, 72-2710, 72-2715 & 72-2720 WHAT S INSIDE Details Page Number Safety Instructions 2 Front Panel 3 INFORMATION ON WASTE DISPOSAL FOR CONSUMERS OF Voltage and Current Adjustment Knob Operation 3 ELECTRICAL & ELECTRONIC EQUIPMENT When this product has reached the end of its life it must be treated as Operation of LOCK Function 5 Waste Electrical & Electronic Equipment (WEEE). Any WEEE marked Operation of Over Current Protection 5 products must not be mixed with general household waste, but kept Specifications 6 separate for the treatment, recovery and recycling of the materials used. Remote Control 7 Contact your local authority for details of recycling schemes in your area. Made in China. PR2 9PP V1.0 1Main Features 4-digit display Low noise Cooling fan controlled by Heatsink temperature Constant voltage Digital panel control Software calibration Over Current Protection 2 adjusting modes of voltage and current Button lock function Safety Instructions Do not block or obstruct the cooling fan vent opening. Avoid severe impacts or rough handling that could lead to damage. Do not discharge static electricity. Do not disassemble unless you are qualified as service personnel. AC input voltage: 110V / 120V / 220V / 230V, 50 / 60Hz AC Input Connect the protective grounding conductor of the AC power cord to and earth ground, to avoid electrical shock. Location: Indoor, no direct sunlight, dust free, almost non-conductive pollution. Operation Relative humidity: <80% Environment Altitude: <2000m Temperature: 0 to 40C (32 to 104F) Location: Indoor Storage Relative humidity: <70% Environment Temperature: -10 to 70C (14 to 158F) Fuse Type Model 110/120V 220/230V 72-2685/72-2705 T4A/250V T2A/250V 72-2690/72-2710 T5A/250V T3A/250V 72-2695/72-2715 T3A/250V T5A/250V 72-2700/72-2720 T5A/250V T3A/250V To ensure fire protection, replace the fuse only with the specified type and rating. Disconnect the power cord before fuse replacement. Make sure the cause of the fuse blowout is fixed before fuse replacement. 2