IND-Thermal-90 SPECIFICATION SHEET Compact industrial-grade multi-pixel thermal camera Terabee IND-Thermal-90 is one of the smallest industrial-grade multi-pixel thermal cameras on the market. Its large (90) Field of View enables temperature monitoring of larger areas, whilst programmable thresholds can be set via Modbus to trigger temperature alarms. It can also count the number of hot/cold spots within its Field of View. Key features Small, lightweight and easy to mount Advanced Thermopile technology enables the sensor to operate over a wide temperature range No need for frequent re-calibration Modbus RS485 interface NO/NC for event triggers, alarms, emergency stop etc Embedded intelligence (EDGE processing) enables simple data processing and local feedback loops that can eliminate the need for a PLC Thermal image outputs, enabled by onboard storage of raw temperature pixels on Modbus registers Copyright Terabee 2021 Terabee, 90 Rue Henri Fabre, 01630, +33 7 50 15 16 64 All Rights Reserved St-Genis-Pouilly, France (5 km from Geneva Airport) terabee-sales terabee.com www.terabee.comIND-Thermal-90 SPECIFICATION SHEET Technical specifications Product code TB-IND-T90 Performance Detection principle Thermopile Sensor resolution 32 x 32 pixels Field of View (FOV) 90 x 90 Frame rate 7 Hz Measurable temperature range -20 C to 670 C 1 Temperature accuracy 2 C for targets below 100 C 2% for targets above 100 C Thermal sensitivity 329 mK (At 1 Hz and 25 C ambient temperature) Electronics Supply voltage V 12V DC to 24V DC DD Typical current consumption 38 mA (at 12V DC) (Without NO/NC load, 20C ambient temperature) 21 mA (at 24V DC) Initialization time < 4 s Interfaces Serial (temperature measurement and remote settings) Type RS485 (half-duplex, 1.2 256 kbps), unprotected Communication protocol Modbus Digital output (alarm) Type Switching (NO/NC in PNP/NPN configuration), 0V - V DD Maximum output current 450 mA (at 24V DC), unfused Output delay < 200 ms Visual notification (status, communication, error) Type 3 x LEDs (multi-color) Mechanics Dimensions 95 mm x 57 mm x 27 mm Weight <100 g (2) Enclosure rating IP65 Housing material Main body: ABS Backplate: Aluminium Type of connection M12 A-coded male connector, 5-pin Ambient operating temperature -10C to 65C (at V = 24 VDC) DD Mounting 4 slots for M4 screws Conformity (2) Reference Standard CE, RoHS, Vibration & Shock (1) Reference Application 2 (see below): central 4x4 pixels and 10 frames temporal moving average. Accuracy may also vary depending on distance, target emissivity, and ambient temperature. (2) Refer to the conformity certificate in the User Manual for details. Copyright Terabee 2021 Terabee, 90 Rue Henri Fabre, 01630, +33 7 50 15 16 64 All Rights Reserved St-Genis-Pouilly, France (5 km from Geneva Airport) terabee-sales terabee.com www.terabee.com