74HC123D CMOS Digital Integrated Circuits Silicon Monolithic 74HC123D 1. Functional Description Dual Monostable Multivibrator 2. General The 74HC123D is a high speed CMOS MONOSTABLE MULTIVIBRATOR fabricated with silicon gate C2MOS technology. It achieves the high speed operation similar to equivalent LSTTL while maintaining the CMOS low power dissipation. There are two trigger inputs, A input (negative edge), and B input (positive edge). These inputs are valid for a slow rise/fall time signal (t = t = 1 s) as they are schmitt trigger inputs. This device may also be triggered by r f using CLR input (positive edge). After triggering, the output stays in a MONOSTABLE state for a time period determined by the external resistor and capacitor (R , C ). A low level at the CLR input breaks this state. In the MONOSTABLE state, if a new X X trigger is applied, it extends the MONOSTABLE period (retrigger mode). Limits for C and R are: X X External capacitor, C : No limit X External resistor, R : V = 2.0 V more than 5 k X CC V 3.0 V more than 1 k CC All inputs are equipped with protection circuits against static discharge or transient excess voltage. 3. Features (Note) (1) Wide operating temperature range: T = -40 to 125 (Note 1) opr (2) High speed: t = 25 ns (typ.) at V = 5 V pd CC (3) Low power dissipation: Standby state: I = 4.0 A (max) at T = 25 CC a Active state: I = 1000 A (max) at T = 25 CC a (4) Balanced propagation delays: t t PLH PHL (5) Wide operating voltage range: V = 2.0 to 6.0 V CC(opr) Note: In the case of using only one circuit, CLR should be tied to GND, R /C C QQ should be tied to OPEN, X X X the other inputs should be tied to V or GND. CC Note 1: Operating Range spec of T = -40 to 125 is applicable only for the products which manufactured after opr July 2020. Start of commercial production 2020-07 2016-2020 2020-11-10 1 Toshiba Electronic Devices & Storage Corporation Rev.4.074HC123D 4. Packaging SOIC16 5. Pin Assignment 6. Marking 2016-2020 2020-11-10 2 Toshiba Electronic Devices & Storage Corporation Rev.4.0