TA48015,018,025,033,05,08,09BF TOSHIBA Bipolar Linear Integrated Circuit Silicon Monolithic TA48015BF,TA48018BF,TA48025BF TA48033BF,TA4805BF,TA4808BF,TA4809BF 1 A Three-Terminal Low-Dropout Voltage Regulator The TA48***BF series consists of fixed-positive-output, low-dropout regulators with an output current of 1 A (max) that utilize V-PNP transistors for the output stage. In response to the need for low-voltage and low-power dissipation devices for use in consumer electronics and industrial appliances, the series offers devices with low output voltages:1.5 V, 1.8 V, 2.5 V, 3.3 V, 5 V, 8 V, 9 V Features Maximum output current: 1 A Weight Low output voltage : 1.5 / 1.8 / 2.5 / 3.3 / 5.0 / 8.0 / 9.0 V HSOP3-P-2.30D : 0.36 g (typ.) Output voltage accuracy : V 3% ( T = 25C) OUT j Low standby current : 850 A (typ.) ( I = 0 A) OUT Low starting quiescent current Low-dropout voltage : V = 0.5 V (max) ( I = 0.5 A) D OUT (1.1V only for TA48015BF) COUT (reference) : 2.2 F(multi-layer ceramic type) Protection function : Overcurrent protection / overheating protection / SOA Package type : Surface-mount New PW-Mold Pin Assignment Marking side 1 3 2 IN GND OUT The product(s) in this document (Product) contain functions intended to protect the Product from temporary small overloads such as minor short-term overcurrent or overheating. The protective functions do not necessarily protect Product under all circumstances. When incorporating Product into your system, please design the system (1) to avoid such overloads upon the Product, and (2) to shut down or otherwise relieve the Product of such overload conditions immediately upon occurrence. For details, please refer to the notes appearing below in this document and other documents referenced in this document. Start of commercial production 2008-10 1 2013-11-01 TA48015,018,025,033,05,08,09BF Marking Note: A line under a Lot No. identifies the indication of TA48***BF Series product Labels. 3 G /RoHS COMPATIBLE or G /RoHS Pb Please contact your TOSHIBA sales representative for 48***BF Product No. (or abbreviation code) details as to environmental matters such as the RoHS compatibility of Product. Lot No. The RoHS is the Directive 2011/65/EU of the European Parliament and of the Council of 8 June 2011 on the Note restriction of the use of certain hazardous substances in 1 2 electrical and electronic equipment. Note1: The *** part of each product number varies according to the output voltage of the product. How to Order Product No. Package Packing Type and Unit for Orders TA48***BF (T6L1, NQ) (Note2) New PW-Mold: Surface-mount Tape (2000 pcs/reel) Note 2: The *** in each product number is replaced with the output voltage of each product. Block Diagram IN 1 Over current Constant protection current circuit Reference voltage circuit OUT 2 Thermal shutdown circuit GND 3 2 2013-11-01