TB67S111PG,HJ Toshiba

TB67S111PG TOSHIBA BiCD Integrated Circuit Silicon Monolithic TB67S111PG Full parallel controlled solenoid driver / unipolar motor driver The TB67S111PG is a solenoid driver /unipolar motor driver for full parallel input. Using the BiCD process, the power supply voltage of 45 V, the output voltage of 80 V, and the output current of 1.5 A/ch (absolute maximum rating) are realized. Features Weight: 1.11 g (typ.) BiCD integrated circuit silicon monolithic. Capable of driving up to four solenoids simultaneously. (4-ch sink driver) Capable of driving a unipolar stepping motor with a single chip. Built-in over current detection (automatic return / time control) at each output. Built-in thermal shutdown detection (automatic return / time control), which detects errors of the whole device. Output (ERR) pin for thermal shutdown signal. Built-in output MOSFET for low ON resistance (0.25 (typ.)). High voltage and large current (as for specifications, please refer to the absolute maximum ratings and operation ranges). Built-in abnormal detection functions (thermal shutdown detection (TSD), over current detection (ISD), and undervoltage detection (POR)). Built-in VCC regulator for internal circuit control, capable of being used as the pull-up point of an error output function. Note: Please be careful about the thermal conditions during use. 2017 1 2017-08-04 Toshiba Electronic Devices & Storage Corporation TB67S111PG Pin Assignment (Top View) VCC VM 1 16 ERR 2 15 COM IN1 OUT1 3 14 4 13 GND GND TB67S111PG 5 12 GND GND 6 11 IN2 OUT2 7 10 OUT3 IN3 8 9 OUT4 IN4 2 2017-08-04