TC4584BP/BF TOSHIBA CMOS Digital Integrated Circuit Silicon Monolithic TC4584BP, TC4584BF TC4584B Hex Schmitt Trigger The TC4584B is the 6-circuit inverter having the Schmitt TC4584BP trigger function at the input terminal. That is, since the circuit threshold level voltages at the leading and trailing edges of input waveform are different (V , V ), the P N TC4584B can be used in the broad range application including line receiver, waveform shaping circuit, astable multivibrator, monostable multivibrator in addition to ordinary inverter. Since the pins are compatible with the TC4069UB, the substitution is also possible. Pin Assignment TC4584BF Weight DIP14-P-300-2.54 : 0.96 g (typ.) SOP14-P-300-1.27A : 0.18 g (typ.) Logic Diagram Input/Output Voltage Characteristic Input-Output Transfer Voltage Waveform Characteristics Start of commercial production 1978-05 1 2014-03-01 TC4584BP/BF Absolute Maximum Ratings (Note) Characteristics Symbol Rating Unit DC supply voltage V V 0.5 to V + 20 V DD SS SS Input voltage V V 0.5 to V + 0.5 V IN SS DD Output voltage V V 0.5 to V + 0.5 V OUT SS DD DC input current I 10 mA IN Power dissipation P 300 (DIP)/180 (SOIC) mW D Operating temperature range T 40 to 85 C opr Storage temperature range T 65 to 150 C stg Note: Exceeding any of the absolute maximum ratings, even briefly, lead to deterioration in IC performance or even destruction. Using continuously under heavy loads (e.g. the application of high temperature/current/voltage and the significant change in temperature, etc.) may cause this product to decrease in the reliability significantly even if the operating conditions (i.e. operating temperature/current/voltage, etc.) are within the absolute maximum ratings and the operating ranges. Please design the appropriate reliability upon reviewing the Toshiba Semiconductor Reliability Handbook (Handling Precautions/Derating Concept and Methods) and individual reliability data (i.e. reliability test report and estimated failure rate, etc). Operating Ranges (V = 0 V) (Note) SS Characteristics Symbol Test Condition Min Typ. MaxUnit DC supply voltage V 3 18 V DD Input voltage V 0 V V IN DD Note 1: The operating ranges must be maintained to ensure the normal operation of the device. Unused inputs must be tied to either V or V . DD SS 2 2014-03-01