Solid State Drive HK3R2 Series Key Features HK3R2 series Hot-Plug/OS-Aware Hot Removal Deterministic Zeroing TRIM supported WWN (World Wide Name) supported TM *1 Strong & highly-efficient ECC named QSBC End to End data protection Serial ATA DIPM (Device Initiated Power Management) supported for reducing power consumption Read only mode supported for emergency 2.5-inch (7mmH) Power loss protection (PLP) NOTE:*1) QSBC is a trademark of Toshiba Corporation. Applications For Enterprise server and storage systems especially cost sensitive or read-intensive applications Specifications and Features Form Factor 2.5-inch (7.0 mmH) Connector Type Standard SATA Memory TOSHIBA MLC NAND Flash Memory *1 Interface ACS-3, SATA revision 3.2 1.5/3/6 Gbit/s *1 Capacity 120/240/480/960 GB *1*2*3 Performance Sequential Read: 524 MB/s 500 MiB/s Sequential Write: 419 MB/s 400 MiB/s Random Read: 75,000 IOPS Random Write: 14,000 IOPS Supply Voltage 5.0 V 5 % Power Consumption Active: 4.5 W typ. Idle: 1.0 W typ. Temperature Operating: 0 C - 55 C Non-operating: -40 C - 70 C 2 Shock Operating / Non-operating: 9,800 m/s 1000 G at 0.5 ms 2 Vibration Operating: 21 m/s 2.17 Grms at 100-800 Hz 2 Non-operating: 159 m/s 16.3 Grms at 20-2,000 Hz Reliability Mean Time to Failure (MTTF): 2,000,000 hours Product Life: Approximately 5 years Size 100.45 mm(Length) x 69.85 mm(Width) x 7.0 mm(Height) Weight 60 g Max. More Features 28-bit LBA mode commands and 48-bit LBA mode commands support Automatic retries and corrections for read errors NCQ (Native Command Queuing) function supported Compliance UL, CSA, TV, KC, BSMI, CE, RCM Note: *1) 1 MB = 1,000,000 bytes, 1 GB = 1,000,000,000 bytes, 1 Gbit = 1,000,000,000 bits 20 *2) 1 MiB (mebibytes) = 2 bytes = 1,048,576 bytes *3) Performances are measured when the SSD is on a steady state. Products and specifications discussed herein are for reference purposes Copyright 2014 TOSHIBA Corporation. All rights reserved. only and are subject to change without notice. All information discussed Solid State Drive HK3R2 Series Brochure Rev. 1.0.0 herein is provided on an as is basis, without warranties of any kind. Before creating and producing designs and using, customers must refer to and comply with the latest versions of the product specifications. Solid State Drive HK3R2 Series Brochure Rev. 1.0.0 Ordering Information THN SN J XXX P C S Z 1 2 3 4 5 6 7 8 1. Model Name THN: Toshiba NAND drive 2. Model Type SN: Non-SED 3. Controller Type J: Type J 4. Capacity 120 / 240 / 480 / 960 120 is 120 GB, 240 is 240 GB, 480 is 480 GB and 960 is 960GB (1 GB = 1,000,000,000 bytes) 5. PLP P: Supported 6. Form Factor C: 2.5-inch case (7.0 mm height) 7. Host I/F Type S: Standard SATA 8. NAND Type Z: MLC 2