TL1F1-NW1,L LED Lamps InGaN and Phosphor TL1F1-NW1,LTL1F1-NW1,LTL1F1-NW1,LTL1F1-NW1,L 1. 1. 1. 1. ApplicationsApplicationsApplicationsApplications General Lighting 2. 2. FeaturesFeatures 2. 2. FeaturesFeatures (1) Size: 6.4 (L) mm 5.0 (W) mm 1.35 (H) mm (2) High luminous flux LED: 100 lm (typ.) I = 350 mA F (3) Color: White (color temperature: 5000 K (typ.)) (4) High Color Rendering Index : Ra = 80 (min.) (5) Operating temperature range: T = -40 to 100 opr (6) Reflow-soldering is available. 3. 3. 3. 3. Packaging and Pin AssignmentPackaging and Pin AssignmentPackaging and Pin AssignmentPackaging and Pin Assignment 1: Anode 2: Cathode 4-5BF1 2013-03-01 1 Rev.1.0TL1F1-NW1,L 4. 4. 4. 4. Absolute Maximum Ratings (Note) (Unless otherwise specified, TAbsolute Maximum Ratings (Note) (Unless otherwise specified, TAbsolute Maximum Ratings (Note) (Unless otherwise specified, TAbsolute Maximum Ratings (Note) (Unless otherwise specified, T = 25 = 25 = 25 = 25)))) aaaa Characteristics Symbol Note Rating Unit Forward current (DC) I See Fig. 4.1 800 mA F Forward current (pulsed) I (Note 1) 1000 FP Power dissipation P 2.8 W D Operating temperature T -40 to 100 opr Storage temperature T -40 to 100 stg Junction temperature T 130 j Note: Using continuously under heavy loads (e.g. the application of high temperature/current/voltage and the significant change in temperature, etc.) may cause this product to decrease in the reliability significantly even if the operating conditions (i.e. operating temperature/current/voltage, etc.) are within the absolute maximum ratings. Please design the appropriate reliability upon reviewing the Toshiba Semiconductor Reliability Handbook Handling PrecautionDerating Concept and Method) and individual reliability data (i.e. reliability test report and estimated failure rate, etc). Fig. Fig. Fig. Fig. 4.14.14.14.1 IIIIFFFF - T - T - T - Taaaa (Note) (Note) (Note) (Note) Note: The junction-to-ambient thermal resistance, R , should be kept below 20 /W so that this product is not th(j-a) exposed to a condition beyond the absolute maximum ratings. R : Thermal resistance from the LED junction to ambient temperature th(j-a) Note 1: Pulse width 10 ms, duty = 1/10 2013-03-01 2 Rev.1.0