TL2FL-NW1,L LED Lamps InGaN and Phosphor TL2FL-NW1,LTL2FL-NW1,LTL2FL-NW1,LTL2FL-NW1,L 1. 1. 1. 1. ApplicationsApplicationsApplicationsApplications General Lighting 2. 2. 2. 2. FeaturesFeaturesFeaturesFeatures (1) Size: 3.0 (L) mm 1.4 (W) mm 0.67 (H) mm (2) High luminous flux LED: 22.9 lm (typ.) I = 65 mA F (3) Color: White (color temperature: 5000 K (typ.)) (4) Operating temperature range: T = -40 to 100 opr (5) Reflow-soldering is available. 3. 3. 3. 3. Packaging and Pin AssignmentPackaging and Pin AssignmentPackaging and Pin AssignmentPackaging and Pin Assignment 1: Cathode 2: Anode 4-1J1A Start of commercial production 2014-02 2014-02-13 1 Rev.2.0TL2FL-NW1,L 4. 4. 4. 4. Absolute Maximum Ratings (Note) (Unless otherwise specified, TAbsolute Maximum Ratings (Note) (Unless otherwise specified, TAbsolute Maximum Ratings (Note) (Unless otherwise specified, TAbsolute Maximum Ratings (Note) (Unless otherwise specified, T = 25 = 25 = 25 = 25 )))) aaaa Characteristics Symbol Rating Unit Forward current (DC) See Fig. 4.1. I 100 mA F Power dissipation P 0.33 W D Operating temperature T -40 to 100 opr Storage temperature T -40 to 100 stg Junction temperature T 125 j Note: Using continuously under heavy loads (e.g. the application of high temperature/current/voltage and the significant change in temperature, etc.) may cause this product to decrease in the reliability significantly even if the operating conditions (i.e. operating temperature/current/voltage, etc.) are within the absolute maximum ratings. Please design the appropriate reliability upon reviewing the Toshiba Semiconductor Reliability Handbook Handling PrecautionDerating Concept and Method) and individual reliability data (i.e. reliability test report and estimated failure rate, etc). Fig. Fig. Fig. Fig. 4.14.14.14.1 IIIIFFFF - T - T - T - Taaaa (Note 1), (Note 2) (Note 1), (Note 2) (Note 1), (Note 2) (Note 1), (Note 2) Note 1: The junction-to-ambient thermal resistance, R , should be kept below 83 /W so that this product is not th(j-a) exposed to a condition beyond the absolute maximum ratings. R : Thermal resistance from the LED junction to ambient temperature th(j-a) Note 2: This LED has a relatively large (mid-range) operating power. When it is mounted in a narrow space or together with other components, they have mutual effects on their thermal characteristics most notably, R affects th(j-a) their junction temperatures. Therefore, care should be exercised to thermal management and PCB selection. If this LED operates at high temperatures, be sure to provide adequate heat dissipation by using an MCP, thermally enhanced PCB and the like, and perform thorough evaluation. 2014-02-13 2 Rev.2.0