TLP127 TOSHIBA Photocoupler IRED & Photo-Transistor TLP127 Programmable Controllers Unit: mm DC-Output Module Telecommunication The TOSHIBA mini-flat coupler TLP127 is a small outline coupler, suitable for surface mount assembly. TLP127 consists of an infrared emitting diode, optically coupled to a Darlington photo transistor with an integral base-emitter resistor. Collector-emitter voltage : 300 V (min) Current transfer ratio : 1000 % (min) Isolation voltage : 2500 Vrms (min) UL-recognized : UL 1577, File No. E67349 cUL-recognized : CSA Component Acceptance Service No.5A File No.E67349 TOSHIBA 11-4C1 VDE-approved : EN 60747-5-5 (Note 1) Weight: 0.09 g (typ.) Note 1: When a VDE approved type is needed, please designate the Option (V4). Pin Configurations (top view) 1 6 3 4 1: ANODE 3: CATHODE 4: EMITTER 6: COLLECTOR Start of commercial production 1988-04 2019 1 2019-05-27 Toshiba Electronic Devices & Storage Corporation TLP127 Absolute Maximum Ratings (Ta = 25C) Characteristic Symbol Rating Unit Forward current I 50 mA F Forward current derating I /C -0.7 mA/C F (Ta 53C) Pulse forward current I 1 A FP (100 s pulse, 100 pps) Reverse voltage V 5 V R Diode power dissipation P 100 mW D Diode power dissipation derating P /C -1.39 mW/C D (Ta 53C) Junction temperature T 125 C j Collector-emitter voltage V 300 V CEO Emitter-collector voltage V 0.3 V ECO Collector current I 150 mA C Collector power dissipation P 150 mW C Collector power dissipation derating P /C -1.5 mW/C C (Ta 25C) Junction temperature T 125 C j Storage temperature range T -55 to 125 C stg Operating temperature range T -55 to 100 C opr Lead soldering temperature (10 s) T 260 C sol Total package power dissipation P 200 mW T Total package power dissipation derating P /C -2.0 mW/C T (Ta 25C) Isolation voltage BV 2500 Vrms S (AC, 60 s, R.H. 60 %) (Note 1) Note: Using continuously under heavy loads (e.g. the application of high temperature/current/voltage and the significant change in temperature, etc.) may cause this product to decrease in the reliability significantly even if the operating conditions (i.e. operating temperature/current/voltage, etc.) are within the absolute maximum ratings. Please design the appropriate reliability upon reviewing the Toshiba Semiconductor Reliability Handbook (Handling Precautions/Derating Concept and Methods) and individual reliability data (i.e. reliability test report and estimated failure rate, etc.). Note 1: Device considered a two terminal device: Pins 1, 3 shorted together and pins 4, 6 shorted together. Recommended Operating Conditions Characteristic Symbol Min Typ. Max Unit Supply voltage V 200 V CC Forward current I 16 25 mA F Collector current I 120 mA C Operating temperature T -25 85 C opr Note: Recommended operating conditions are given as a design guideline to obtain expected performance of the device. Additionally, each item is an independent guideline respectively. In developing designs using this product, please confirm specified characteristics shown in this document. 2019 2 2019-05-27 Toshiba Electronic Devices & Storage Corporation Detector LED