TLP172AM(E Toshiba

TLP172AM Photocouplers Photorelay TLP172AM 1. Applications Security Systems Factory Automation (FA) Measuring Instruments Battery Management System (BMS) (Non-Automotive) Programmable Logic Controllers (PLCs) Mechanical relay replacements 2. General The Toshiba TLP172AM consists of an infrared LED optically coupled to a photo-MOSFET in a 4-pin SO6 package. This photorelay has higher output current rating than phototransistor-type photocoupler hence, it is suitable for use as On/Off control for high current. 3. Features (1) Halogen-free For details, seeDevices in Halogen-Free Resin Package at the end of this datasheet. (2) Operating temperature range: 110 (max) -40 (min) (3) Normally opened (1-Form-A) (4) OFF-state output terminal voltage: 60 V (min) (5) Trigger LED current: 3 mA (max) (6) ON-state current: 500 mA (max) (7) ON-state resistance: 2 (max) (8) Isolation voltage: 3750 Vrms (min) (9) Safety standards UL-recognized: UL 1577, File No.E67349 cUL-recognized: CSA Component Acceptance Service No.5A File No.E67349 UL-recognized: UL 508, File No.E499232 (Note 1) VDE-approved: EN 60747-5-5 (Note 2) Note 1: Please refer Absolute Maximum Ratings (UL-recognized UL 508) for UL 508 products. Note 2: When a VDE approved type is needed, please designate the Option (V4). Table 3.1 Mechanical Parameters Characteristics TLP172AM Unit Creepage distances 5.0 (min) mm Clearance distances 5.0 (min) Internal isolation thickness 0.2 (min) Start of commercial production 2016-06 2016-2021 2021-05-27 1 Toshiba Electronic Devices & Storage Corporation Rev.10.0TLP172AM 4. Packaging and Pin Assignment 1: Anode 3: Cathode 4: Drain 6: Drain 11-4M1S 5. Internal Circuit 2016-2021 2021-05-27 2 Toshiba Electronic Devices & Storage Corporation Rev.10.0