TLP2748 Photocouplers GaAAs Infrared LED & Photo IC TLP2748TLP2748TLP2748TLP2748 1. 1. ApplicationsApplications 1. 1. ApplicationsApplications Intelligent Power Module Signal Isolation Programmable Logic Controllers (PLCs) High-Speed Digital Interfacing for Instrumentation and Control Devices 2. 2. 2. 2. GeneralGeneralGeneralGeneral The Toshiba TLP2748 consists of high-output GaAAs light-emitting diode coupled with a high-gain, high-speed photo detector. It is housed in a thin SO6L package of 2.3 mm(max). The TLP2748 has guaranteed the isolation voltage 5 kVrms and compliant with international safety standards for reinforced insulation. This product can operate in power supply voltage 4.5 V to 30 V with the maximum operative temperature of 110 . Since TLP2748 has guaranteed 3 mA low supply current (I /I ), and 1.6 mA low threshold input current CCL CCH (I ), it contributes to energy saving of devices. It can drive directly from a microcomputer for a low input current. FHL The detector has a totem-pole output stage with current sourcing and sinking capabilities. The TLP2748 has an internal Faraday shield that provides a guaranteed common-mode transient immunity of 30 kV/s. The TLP2748 has an inverter output. A buffer output version, the TLP2745, is also available. 3. 3. FeaturesFeatures 3. 3. FeaturesFeatures (1) Inverter logic type (Totem pole output) (2) Package: SO6L (3) Operating temperature: -40 to 110 (4) Supply voltage: 4.5 to 30 V (5) Threshold input current: 1.6 mA (max) (6) Supply current: 3 mA (max) (7) Propagation delay time: t /t = 120 ns (max) pHL pLH (8) Pulse width distortion: t -t = 40 ns (max) pHL pLH (9) Common-mode transient immunity: 30 kV/s (min) (10) Isolation voltage: 5000 Vrms (min) (11) Safety standards UL-approved: UL1577, File No.E67349 cUL-approved: CSA Component Acceptance Service No.5A File No.E67349 (Note 1) VDE-approved: EN60747-5-5, EN60065 or EN60950-1, EN62368-1 (Pending) (Note 1)(Note 1)(Note 1) Option (D4) Note 1: When a VDE approved type is needed, please designate the Option (D4)Option (D4)Option (D4). Start of commercial production 2015-05 2015 Toshiba Corporation 2015-11-13 1 Rev.2.0TLP2748 4. 4. 4. 4. Packaging and Pin ConfigurationPackaging and Pin ConfigurationPackaging and Pin ConfigurationPackaging and Pin Configuration 1: Anode 2: N.C. 3: Cathode 4: GND 5: V (Output) O 6: V CC 11-4N1A 5. 5. 5. 5. Internal Circuit (Note)Internal Circuit (Note)Internal Circuit (Note)Internal Circuit (Note) Note: A 0.1-F bypass capacitor must be connected between pin 6 and pin 4. 6. Principle of Operation 6. 6. 6. Principle of OperationPrinciple of OperationPrinciple of Operation 6.1. 6.1. 6.1. 6.1. Truth TableTruth TableTruth TableTruth Table Input LED Output H ON L L OFF H 6.2. Mechanical Parameters 6.2. 6.2. 6.2. Mechanical ParametersMechanical ParametersMechanical Parameters Characteristics Min Unit Creepage distances 8.0 mm Clearance distances 8.0 Internal isolation thickness 0.4 2015 Toshiba Corporation 2015-11-13 2 Rev.2.0