TLP3041(S),TLP3042(S),TLP3043(S) TOSHIBA PHOTOCOUPLER GaAs IRED & PHOTO-TRIAC TLP3041(S),TLP3042(S),TLP3043(S) Unit: mm OFFICE MACHINE HOUSEHOLD USE EQUIPMENT TRIAC DRIVER SOLID STATE RELAY The TOSHIBA TLP3041 (S), TLP3042 (S), TLP3043 (S) consist of a zero voltage crossing turn-on photo-triac optically coupled to a gallium arsenide infrared emitting diode in a six lead plastic DIP package. z Peak Off-State Voltage : 400 V (min) z Trigger LED Current : 15 mA (max) (TLP3041(S)) 10 mA (max) (TLP3042(S)) 5 mA (max) (TLP3043(S)) z On-State Current : 100 mA (max) JEDEC z Isolation Voltage : 5000 Vrms (min) JEITA z UL Recognized : UL1577, File No. E67349 TOSHIBA 11-7A9 z SEMKO Approved : SS EN60065 weight: 0.39g (typ.) SS EN60950, File No.9841109 z BSI Approved : BS EN60065, File No.8385 BS EN60950, File No.8386 z Option (D4) type Pin Configuration VDE approved: DIN EN60747-5-2 (top view) Approved No. 40009302 Maximum operating insulation voltage: 890VPK 1 6 Highest permissible over voltage: 8000VPK 2 (Note):When a EN60747-5-2 approved type is needed, please designate theOption (D4 ZC 4 3 z Construction mechanical rating 1: Anode 7.62 mm pich 10.16 mm pich 2: Cathode Standard Type TLPxxxxF Type 3: N.C. Creepage Distance 7.0 mm (Min) 8.0 mm (Min) 4:Terminal 1 Clearance 7.0 mm (Min) 8.0 mm (Min) Insulation Thickness 0.5 mm (Min) 0.5 mm (Min) 6:Terminal 2 ZC:Zero-cross Circuit 1 2010-10-01 TLP3041(S),TLP3042(S),TLP3043(S) Absolute Maximum Ratings (Ta = 25C) CHARACTERISTIC SYMBOL RATING UNIT Forward Current I 50 mA F Forward Current Derating I / C 0.7 mA / C F (Ta 53C) Peak Forward Current I 1 A FP (100s pulse, 100pps) Power Dissipation P 100 mW D Power Dissipation Derating P / C 1.0 mW / C D (Ta 25C) Reverse Voltage V 5 V R Junction Temperature T 125 C j Off-State Output Terminal Voltage V 400 V DRM On-Stage RMS Ta = 25C 100 I mA T(RMS) Current Ta = 70C 50 On-State Current Derating I / C 1.1 mA / C T (Ta 25C) Peak On-Stage Current I 2 A TP (100s pulse, 120pps) Peak Nonrepetitive Surge I 1.2 A TSM Current (P = 10ms) W Power Dissipation P 300 mW D Power Dissipation Derating P / C 4.0 mW / C D (Ta 25C) Junction Temperature T 115 C j Storage Temperature Range T 55 to 150 C stg Operating Temperature Range T 40 to 100 C opr Lead Soldering Temperature (10s) T 260 C sol Total Package Power Dissipation P 330 mW T Total Package Power Dissipation P / C 4.4 mW / C T Derating (Ta 25C) Isolation Voltage BV 5000 Vrms S (AC, 1 min., R.H. 60%) (Note 1) Note: Using continuously under heavy loads (e.g. the application of high temperature/current/voltage and the significant change in temperature, etc.) may cause this product to decrease in the reliability significantly even if the operating conditions (i.e. operating temperature/current/voltage, etc.) are within the absolute maximum ratings. Please design the appropriate reliability upon reviewing the Toshiba Semiconductor Reliability Handbook (Handling Precautions/Derating Concept and Methods) and individual reliability data (i.e. reliability test report and estimated failure rate, etc). Note 1: Device considered a two terminal device: Pins 1, 2 and 3 shorted together and pins 4 and 6 shorted together. Recommended Operating Conditions CHARACTERISTIC SYMBOL MINTYP.MAXUNIT Supply Voltage V 120 Vac AC Forward Current I* 15 20 25 mA F Peak On-Stage Current I 1 A TP Operating Temperature T 25 85 C opr Note: Recommended operating conditions are given as a design guideline to obtain expected performance of the device. Additionally, each item is an independent guideline respectively. In developing designs using this product, please confirm specified characteristics shown in this document. * : In the case of TLP3042 2 2010-10-01 DETECTOR LED