TLP3064(S) TOSHIBA PHOTOCOUPLER GaAlAs IRED & PHOTO-TRIAC TLP3064(S) OFFICE MACHINE Unit: in mm HOUSEHOLD USE EQUIPMENT TRIAC DRIVER SOLID STATE RELAY The TOSHIBA TLP3064(S) consists of a zero voltage crossing turn-on photo-triac optically coupled to a GaAlAs infrared emitting diode in a six lead plastic DIP package. Peak Off-State Voltage : 600 V(Min) Trigger LED Current : 3 mA(Max) On-State Current : 100 mA(Max) Isolation Voltage : 5000 Vrms(Min) UL Recognized : UL1577,File No.E67349 SEMKO Approved : SS EN60065 SS EN60950, File No.9841113 BSI Approved : BS EN60065, File No.8385 BS EN60950, File No.8386 JEDEC TOSHIBA 11-7A9 Option (D4) type Weight: 0.39 g (typ.) VDE approved: DIN EN60747-5-2 Approved No. 40009302 Pin Configuration Maximum operating insulation voltage: 890 V PK (top view) Highest permissible over voltage: 8000 V PK 1 (Note):When a EN60747-5-2 approved type is needed, 6 please designate theOption (D4 2 Construction Mechanical Rating ZC 4 3 7.62 mm pitch 10.16 mm pitch Standard Type TLPxxxxF Type Creepage Distance 7.0 mm (Min) 8.0 mm (Min) 1: Anode Clearance 7.0 mm (Min) 8.0 mm (Min) 2: Cathode Insulation Thickness 0.5 mm (Min) 0.5 mm (Min) 3: N.C. 4:Terminal 1 6:Terminal 2 ZC:Zero-cross Circuit 1 2010-10-01 TLP3064(S) Absolute Maximum Ratings (Ta = 25C) CHARACTERISTIC SYMBOLRATING UNIT Forward Current I 30 mA F Forward Current Derating (Ta 25C) I /C 0.3 mA /C F Peak Forward Current (100 s pulse, 100 pps) I 1 A FP Reverse Voltage V 5 V R Junction Temperature Tj 125 C Off-State Output Terminal Voltage V 600 V DRM Ta = 25C 100 On-State RMS Current I mA T(RMS) Ta = 70C 50 On-State Current Derating (Ta 25C) I/C -1.1 mA /C T Peak On-State Current (100 s pulse, 120 pps) I 2 A TP Peak Nonrepetitive Surge Current (Pw = 10 ms) I 1.2 A TSM Junction Temperature T 115 C j Storage Temperature Range T 55 to 150 C stg Operating Temperature Range T 40 to 100 C opr Lead Soldering Temperature (10 s) T 260 C sol Isolation Voltage (AC, 1 min., R.H.60%) (Note 2) BV 5000 Vrms S Note: Using continuously under heavy loads (e.g. the application of high temperature/current/voltage and the significant change in temperature, etc.) may cause this product to decrease in the reliability significantly even if the operating conditions (i.e. operating temperature/current/voltage, etc.) are within the absolute maximum ratings. Please design the appropriate reliability upon reviewing the Toshiba Semiconductor Reliability Handbook (Handling Precautions/Derating Concept and Methods) and individual reliability data (i.e. reliability test report and estimated failure rate, etc). (Note 2) Device considered a two terminal device:Pins1, 2 and 3 shorted together and pin 4 and pin 6 shorted together. Recommended Operating Conditions CHARACTERISTIC SYMBOL MIN.TYP.MAX.UNIT Supply Voltage V 240 V AC ac Forward Current I 4.5 6 7.5 mA F Peak On-State Current I 1 A TP Operating Temperature T 10 85 C opr Note: Recommended operating conditions are given as a design guideline to obtain expected performance of the device. Additionally, each item is an independent guideline respectively. In developing designs using this product, please confirm specified characteristics shown in this document. 2 2010-10-01 DETECTOR LED