TLP3320 Photocouplers Photorelay TLP3320TLP3320TLP3320TLP3320 1. 1. ApplicationsApplications 1. 1. ApplicationsApplications High-Speed Memory Testers High-Speed Logic IC Testers Radio-Frequency Measuring Instruments ATE (Automatic Test Equipment) 2. 2. 2. 2. GeneralGeneralGeneralGeneral The TLP3320 is a photorelay in a 4-pin USOP that consists of a photo MOSFET optically coupled with an infrared LED. 3. 3. FeaturesFeatures 3. 3. FeaturesFeatures (1) Normally open (1-Form-A) (2) OFF-state output terminal voltage: 100 V (min) (3) Trigger LED current: 3 mA (max) (4) ON-state current: 100 mA (max) (5) ON-state resistance: 8 (typ.), 14 (max) (6) OFF-state Capacitance: 6 pF (typ.), 8 pF (max) (7) Isolation voltage: 1000 Vrms (min) (8) Safety standard UL-recognized: UL 1577, File No.E67349 4. 4. 4. 4. Packaging and Pin AssignmentPackaging and Pin AssignmentPackaging and Pin AssignmentPackaging and Pin Assignment 1: Anode 2: Cathode 3: Drain 4: Drain 11-2C1S Start of commercial production 2011-11 2017-2020 2020-02-19 1 Toshiba Electronic Devices & Storage Corporation Rev.4.0TLP3320 5. 5. 5. 5. Internal CircuitInternal CircuitInternal CircuitInternal Circuit 6. 6. 6. 6. Absolute Maximum Ratings (Note) (Unless otherwise specified, TAbsolute Maximum Ratings (Note) (Unless otherwise specified, TAbsolute Maximum Ratings (Note) (Unless otherwise specified, TAbsolute Maximum Ratings (Note) (Unless otherwise specified, T = 25 = 25 = 25 = 25 )))) aaaa Characteristics Symbol Note Rating Unit LED Input forward current I 50 mA F Input forward current derating (T 25 ) I /T -0.5 mA/ a F a Input reverse voltage V 5 V R Input power dissipation P 50 mW D Input power dissipation derating (T 25 ) P /T -0.5 mW/ a D a Junction temperature T 125 j Detector OFF-state output terminal voltage V 100 V OFF ON-state current I 100 mA ON ON-state current derating (T 25 ) I /T -1.0 mA/ a ON a ON-state current (pulsed) (t = 100 ms, Duty = 1/10) I 300 mA ONP Output power dissipation P 96 mW O Output power dissipation derating (T 25 ) P /T -0.96 mW/ a O a Junction temperature T 125 j Common Storage temperature T -40 to 125 stg Operating temperature T -40 to 85 opr Lead soldering temperature (10 s) T 260 sol Isolation voltage AC, 60 s, R.H. 60 % BV (Note 1) 1000 Vrms S Note: Using continuously under heavy loads (e.g. the application of high temperature/current/voltage and the significant change in temperature, etc.) may cause this product to decrease in the reliability significantly even if the operating conditions (i.e. operating temperature/current/voltage, etc.) are within the absolute maximum ratings. Please design the appropriate reliability upon reviewing the Toshiba Semiconductor Reliability Handbook Handling PrecautionDerating Concept and Method) and individual reliability data (i.e. reliability test report and estimated failure rate, etc). Note 1: This device is considered as a two-terminal device: Pins 1 and 2 are shorted together, and pins 3 and 4 are shorted together. Caution:This device is sensitive to electrostatic discharge (ESD). Extreme ESD conditions should be guarded against by using proper antistatic precautions for the worktable, operator, solder iron, soldering equipment and so on. 7. 7. Recommended Operating Conditions (Note)Recommended Operating Conditions (Note) 7. 7. Recommended Operating Conditions (Note)Recommended Operating Conditions (Note) Characteristics Symbol Note Min Typ. Max Unit Supply voltage V 80 V DD Input forward current I 5 7.5 20 mA F ON-state current I 100 ON Operating temperature T -20 65 opr Note: The recommended operating conditions are given as a design guide necessary to obtain the intended performance of the device. Each parameter is an independent value. When creating a system design using this device, the electrical characteristics specified in this data sheet should also be considered. 2017-2020 2020-02-19 2 Toshiba Electronic Devices & Storage Corporation Rev.4.0