TLP3542 TOSHIBA PHOTOCOUPLER PHOTO RELAY TLP3542 TESTERS DATA RECORDING EQUIPMENTS Unit: mm MEASUREMENT EQUIPMENTS The TOSHIBA TLP3542 consists of an infrared emitting diode optically coupled to a photo-MOS FET in a plastic DIP package. The TLP3452 series are a bi-directional switch, which can replace mechanical relays in many applications. And its high on-state current maximum rating is suitable to control a power line. 6 pin DIP (DIP6) 1-Form-A Peak Off-State Voltage : 60 V (min) Trigger LED Current : 3 mA (max) On-State Current : 2.5 A (max) JEDEC On-State Resistance : 100 m (max) JEITA TOSHIBA 11 7A9 Output capacitance : 600 pF (max) Weight: 0.4 g (typ.) Isolation Voltage : 2500 Vrms (min) UL-recognized : UL 1577, File No.E67349 cUL-recognized : CSA Component Acceptance Service No.5A File No.E67349 Pin Configuration (top view) 1 : ANODE 2 : CATHODE 1 6 3 : N.C. 4 : DRAIN D1 6 : DRAIN D2 2 3 4 Schematic 1 6 2 4 Start of commercial production 2003-07 2019 1 2019-06-24 Toshiba Electronic Devices & Storage Corporation TLP3542 Absolute Maximum Ratings (Ta = 25C) CHARACTERISTIC SYMBOL RATING UNIT Forward Current I 30 mA F Forward Current Derating (Ta 25C) I /C 0.3 mA/C F Reverse Voltage V 5 V R Diode Power Dissipation P 50 mW D Diode Power Dissipation Derating (Ta 25C) PD /C -0.5 mW/C Junction Temperature T 125 C j Off-State Output Terminal Voltage V 60 V OFF On-State Current I 2.5 A ON On-State Current Derating(Ta 40C) I /C -22 mA/C ON Output Power Dissipation Po 625 mW Output Power Dissipation Derating (Ta 40C) Po / C 7.4 mW / C Junction Temperature T 125 C j Storage Temperature Range T 40 to 125 C stg Operating Temperature Range T 20 to 85 C opr Lead Soldering Temperature (10 s) T 260 C sol Isolation Voltage (AC, 60 s, R.H. 60 %) (NOTE1) BV 2500 Vrms S Note: Using continuously under heavy loads (e.g. the application of high temperature/current/voltage and the significant change in temperature, etc.) may cause this product to decrease in the reliability significantly even if the operating conditions (i.e. operating temperature/current/voltage, etc.) are within the absolute maximum ratings. Please design the appropriate reliability upon reviewing the Toshiba Semiconductor Reliability Handbook (Handling Precautions/Derating Concept and Methods) and individual reliability data (i.e. reliability test report and estimated failure rate, etc). NOTE 1: Device considered a two-terminal device: Pins 1, 2 and 3 shorted together, and pins 4 and 6 shorted together. Recommended Operating Conditions CHARACTERISTIC SYMBOL MIN TYP. MAX UNIT Supply Voltage V 48 V DD Forward Current I 10 20 mA F On-State Current I 2.5 A ON Operating Temperature T -20 60 C opr Note: Recommended operating conditions are given as a design guideline to obtain expected performance of the device. Additionally, each item is an independent guideline respectively. In developing designs using this product, please confirm specified characteristics shown in this document. 2019 2 2019-06-24 Toshiba Electronic Devices & Storage Corporation DETECTOR LED