TLP598GAF Toshiba

TLP598GA TOSHIBA Photocoupler Photo Relay TLP598GA Telecommunication Unit: mm Data Acquisition Measurement Instrumentation The TOSHIBA TLP598GA consists of an infrared emitting diode optically coupled to a photo-MOS FET in a six lead plastic DIP package (DIP6). The TLP598GA is a bi-directional switch which can replace mechanical relays in many applications. Peak off-state voltage: 400 V (min) On-state current: 150 mA (max) TOSHIBA 11-7A8S On-state resistance: 12 (max) Isolation voltage: 2500 Vrms (min) Weight: 0.4 g (typ.) UL-recognized: UL 1577, File No.E67349 Pin Configuration (top view) 1: ANODE 2: CATHODE 3: N.N.C.C. 4: DRAIN D1 5: SOURCE 6: DRAIN D2 Schematic 6 1 5 2 4 Start of commercial production 2004-08 2019 1 2019-06-24 Toshiba Electronic Devices & Storage Corporation TLP598GA Absolute Maximum Ratings (Ta = 25C) Characteristic Symbol Rating Unit Forward current I 30 mA F Forward current derating (Ta 25C) I / C -0.3 mA / C F Peak forward current (100 s pulse, 100 pps) I 1 A FP Reverse voltage V 5 V R P 50 mW Diode power dissipation D Diode power dissipation derating (Ta >25C) P /C -0.5 mW/C D Junction temperature T 125 C j Off-state output terminal voltage V 400 V OFF A connection 150 On-state RMS current B connection I 200 mA ON C connection 300 A connection -1.5 On-state current derating (Ta 25C) B connection ION / C -2.0 mA / C C connection -3.0 A connection 270 Output power dissipation B connection P 240 mW O C connection 270 A connection -2.7 Output power dissipation derating (Ta 25C) B connection P / C -2.4 mW / C O C connection -2.7 Junction temperature T 125 C j Storage temperature range T -55 to 125 C stg Operating temperature range T -40 to 85 C opr Lead soldering temperature (10 s) T 260 C sol Isolation voltage (AC, 60 s, R.H. 60 %) (Note 1) BVS 2500 Vrms Note: Using continuously under heavy loads (e.g. the application of high temperature/current/voltage and the significant change in temperature, etc.) may cause this product to decrease in the reliability significantly even if the operating conditions (i.e. operating temperature/current/voltage, etc.) are within the absolute maximum ratings. Please design the appropriate reliability upon reviewing the Toshiba Semiconductor Reliability Handbook (Handling Precautions/Derating Concept and Methods) and individual reliability data (i.e. reliability test report and estimated failure rate, etc). Note 1: Device considered a two-terminal device: Pins 1, 2 and 3 shorted together, and pins 4, 5 and 6 shorted together. Recommended Operating Conditions Characteristic Symbol Min Typ. Max Unit Supply voltage V 320 V DD Forward current I 5 7.5 20 mA F On-state current (A connection) I 150 mA ON Operating temperature T -20 80 C opr Note: Recommended operating conditions are given as a design guideline to obtain expected performance of the device. Additionally, each item is an independent guideline respectively. In developing designs using this product, please confirm specified characteristics shown in this document. 2019 2 2019-06-24 Toshiba Electronic Devices & Storage Corporation Detector LED