TLP360J TOSHIBA Photocoupler GaAs Ired & Photo-Triac TLP360J Triac Drivers Unit: mm Programmable Controllers AC-Output Modules Solid State Relays TOSHIBA TLP360J consists of a photo-triac optically coupled to a gallium arsenide infrared-emitting diode in a four-lead plastic DIP package. Peak off-state voltage: 600 V (min) Trigger LED current: 10 mA (max) On-state current: 100 mA (max) Isolation voltage: 5000 Vrms (min) UL recognized: UL1577, file No. E67349 Option (D4) type TV approved: DIN EN60747-5-2 Certificate No. R50033433 Maximum operating insulation voltage : 890 Vpk Maximum permissible overvoltage : 8000 Vpk JEDEC (Note) When an EN60747-5-2 approved type is needed, TOSHIBA 11-5B2 please designate Option (D4). Weight: 0.26 g (typ.) Construction mechanical rating Pin Configuration (top view) 7.62 mm pitch 10.16 mm pitch standard type TLPXXXF type Creepage distance 7.0 mm (min) 8.0 mm (min) 4 1 Clearance 7.0 mm (min) 8.0 mm (min) Insulation thickness 0.4 mm (min) 0.4 mm (min) 2 3 Trigger LED Current 1: Anode Trigger LED current (mA) 2: Cathode Marking of V = 6 V, Ta = 25C Classification* 3: Terminal1 T classification Min Max 4: Terminal2 (IFT7) 7 T7 Standard 10 T7, blank *Example: (IFT7) TLP360J(IFT7) (Note) When specifying the application type name for certification testing, be sure to use the standard product type name, e.g. TLP360J(IFT7): TLP360J. Start of commercial production 2003/06 1 2014-09-22 TLP360J Absolute Maximum Ratings (Ta = 25C) Characteristic Symbol Rating Unit Forward current I 50 mA F Forward current derating (Ta 53C) I /C 0.7 mA /C F Peak forward current (100 s pulse, 100 pps) I 1 A FP Reverse voltage V 5 V R Junction temperature T 125 C j Off-state output terminal voltage V 600 V DRM Ta = 25C 100 On-state RMS current I mA T(RMS) Ta = 70C 50 On-state current derating (Ta 25C) I/C -1.1 mA /C T Peak on-state current (100 s pulse, 120 pps) I 2 A TP Peak non-repetitive surge current (Pw = 10 ms) I 1.2 A TSM Junction temperature T 115 C j Storage temperature range T 55 to 125 C stg Operating temperature range T 40 to 100 C opr Lead soldering temperature (10 s) T 260 C sol Isolation voltage (AC, 1 minute, R.H. 60%) (Note 1) BV 5000 Vrms S Note: Using continuously under heavy loads (e.g. the application of high temperature/current/voltage and the significant change in temperature, etc.) may cause this product to decrease in the reliability significantly even if the operating conditions (i.e. operating temperature/current/voltage, etc.) are within the absolute maximum ratings. Please design the appropriate reliability upon reviewing the Toshiba Semiconductor Reliability Handbook (Handling Precautions/Derating Concept and Methods) and individual reliability data (i.e. reliability test report and estimated failure rate, etc). Note 1: Pins 1 and 2 are shorted together and pins 3 and 4 are shorted together. Recommended Operating Conditions Characteristic Symbol MinTyp.Max Unit Supply voltage V 240 V AC ac Forward current I 15 20 25 mA F Peak on-state current I 1 A TP Operating temperature T 25 85 C opr Note: Recommended operating conditions are given as a design guideline to obtain expected performance of the device. Additionally, each item is an independent guideline respectively. In developing designs using this product, please confirm specified characteristics shown in this document. 2 2014-09-22 Detector LED