TLP3924 TOSHIBA PHOTOCOUPLER IRED & PHOTODIODE ARRAY TLP3924 TELECOMMUNICATION Unit: mm PROGRAMMABLE CONTROLLERS MOSFET GATE DRIVER 4.2 1.4 The TOSHIBA SSOP coupler TLP3924 is a small outline coupler, suitable for 3.65 1.9 surface mount assembly. The TLP3924 consists of an infrared emitting diode, optically coupled to a series connected photo diode array which is suitable for MOSFET gate drive. (0.3) 0.2 3.8 0.2 1.27 2.04 Features (0.46) 4 pin SSOP (SSOP4) : 1.8 mm high, 1.27 mm pitch Open Voltage : 30 V (min) Short Current : 4 A (min) Isolation Voltage : 1500 Vrms (min) UL-recognized : UL 1577, File No.E67349 TOSHIBA 11-2B1 Weight: 0.03 g (typ.) Pin Configuration (top view) 1 4 1. ANODE 2. CATHODE 3. CATHODE 4. ANODE 2 3 Start of commercial production 2004-08 2019 1 2019-06-24 Toshiba Electronic Devices & Storage Corporation 1.8 0.15 TLP3924 Absolute Maximum Ratings (Ta = 25C) Characteristic Symbol Rating Unit Forward Current I 30 mA F Forward Current I / C 0.3 mA / C F Derating (Ta 25C) Reverse Voltage V 5 V R LED P 50 mW Diode Power Dissipation D P /C -0.5 mW/C Diode Power Dissipation Derating D (Ta 25C) Junction Temperature T 125 C j Forward Current I 50 A FD Reverse Voltage V 10 V RD DETECTOR Output Power Dissipation P 0.5 mW O Junction Temperature T 125 C j Storage Temperature Range T 55 to 125 C stg Operating Temperature Range T 40 to 85 C opr Lead Soldering Temperature (10 s) T 260 C sol Isolation Voltage BV 1500 Vrms S (AC, 60 s, R.H. 60 %) (Note 1) Note: Using continuously under heavy loads (e.g. the application of high temperature/current/voltage and the significant change in temperature, etc.) may cause this product to decrease in the reliability significantly even if the operating conditions (i.e. operating temperature/current/voltage, etc.) are within the absolute maximum ratings. Please design the appropriate reliability upon reviewing the Toshiba Semiconductor Reliability Handbook (Handling Precautions/Derating Concept and Methods) and individual reliability data (i.e. reliability test report and estimated failure rate, etc). Note 1: Device considered a two terminal device: Pins 1 and 2 shorted together and pins 3 and 4 shorted together. Precautions This device is sensitive to electrostatic discharge. When using this device, please ensure that all tools and equipment are earthed. Recommended Operating Conditions (Note 2) Characteristic Symbol Min Typ. Max Unit Forward Current I 7 20 mA F Operating Temperature T 25 65 C opr Note: Recommended operating conditions are given as a design guideline to obtain expected performance of the device. Additionally, each item is an independent guideline respectively. In developing designs using this product, please confirm specified characteristics shown in this document. Individual Electrical Characteristics (Ta = 25C) Characteristic Symbol Test Condition Min Typ. Max Unit Forward Voltage V I = 10 mA 1.15 1.30 1.45 V F F LED Reverse Current I V = 5 V 10 A R R Capacitance C VF = 0 V, f = 1 MHz 30 pF T Forward Voltage V I = 10 A 39 V FD FD Reverse Current I V = 10 V 1 nA RD RD DETECTOR Capacitance C V = 0 V, f = 1 MHz 1.5 pF TD (Anode to Cathode) 2019 2 2019-06-24 Toshiba Electronic Devices & Storage Corporation