TEC 2-1223WI TRACO Power

DC/DC Converter TEC 2WI Series, 2 Watt Compact SIP-8 package I/O-isolation voltage 1600 VDC Ultra-wide 4:1 input voltage range Fully regulated outputs Operating temperature range 40C to + 93C TEC 2WI is a new series with the design purpose to improve the prevalent 2 Watt SIP-8 DC/DC converters in terms of cost, efficiency and performance. The Continuous short circuit protection latest technology and components enable an increase in efficiency by more Remote On/Off than 20%. With the reduction of thermal loss, the operating temperature range can be expanded from -40C to +93C. The converters are fully regulated over 3-year product warranty 0 - 100% load (no minimum load is required). The models are available with ul- Designed to meet UL 62368-1 tra-wide input ranges of 4.5-18, 9-36 and 18-75 VDC. The functional I/O-isola- tion system is designed to meet IEC/EN 62368-1 with a test voltage (60 s) of 1600 VDC. Models Order Code Input Voltage Output 1 Output 2 Efficiency Range Vnom Imax Vnom Imax typ. TEC 2-1210WI 3.3 VDC 500 mA 75 % TEC 2-1211WI 5 VDC 400 mA 80 % TEC 2-1219WI 9 VDC 222 mA 81 % TEC 2-1212WI 12 VDC 167 mA 81 % 4.5 - 18 VDC TEC 2-1213WI 15 VDC 134 mA 82 % (12 VDC nom.) TEC 2-1215WI 24 VDC 83 mA 82 % TEC 2-1221WI +5 VDC 200 mA 5 VDC 200 mA 80 % TEC 2-1222WI +12 VDC 83 mA 12 VDC 83 mA 82 % TEC 2-1223WI +15 VDC 67 mA 15 VDC 67 mA 81 % TEC 2-2410WI 3.3 VDC 500 mA 76 % TEC 2-2411WI 5 VDC 400 mA 80 % TEC 2-2419WI 9 VDC 222 mA 80 % TEC 2-2412WI 12 VDC 167 mA 82 % 9 - 36 VDC TEC 2-2413WI 15 VDC 134 mA 82 % (24 VDC nom.) TEC 2-2415WI 24 VDC 83 mA 82 % TEC 2-2421WI +5 VDC 200 mA 5 VDC 200 mA 79 % TEC 2-2422WI +12 VDC 83 mA 12 VDC 83 mA 82 % TEC 2-2423WI +15 VDC 67 mA 15 VDC 67 mA 80 % TEC 2-4810WI 3.3 VDC 500 mA 74 % TEC 2-4811WI 5 VDC 400 mA 79 % TEC 2-4819WI 9 VDC 222 mA 81 % TEC 2-4812WI 12 VDC 167 mA 82 % 18 - 75 VDC TEC 2-4813WI 15 VDC 134 mA 81 % (48 VDC nom.) TEC 2-4815WI 24 VDC 83 mA 81 % TEC 2-4821WI +5 VDC 200 mA 5 VDC 200 mA 79 % TEC 2-4822WI +12 VDC 83 mA 12 VDC 83 mA 81 % TEC 2-4823WI +15 VDC 67 mA 15 VDC 67 mA 81 % Page 1 / 4 www.tracopower.com April 27, 2020TEC 2WI Series, 2 Watt Input Specifications Input Current - At no load 12 Vin models: 35 mA typ. 24 Vin models: 20 mA typ. 48 Vin models: 10 mA typ. Surge Voltage 12 Vin models: 25 VDC max. (1 s max.) 24 Vin models: 50 VDC max. (1 s max.) 48 Vin models: 100 VDC max. (1 s max.) Under Voltage Lockout 12 Vin models: 2 VDC min. / 3 VDC typ. / 4 VDC max. 24 Vin models: 6 VDC min. / 7 VDC typ. / 8 VDC max. 48 Vin models: 13 VDC min. / 15 VDC typ. / 17 VDC max. Recommended Input Fuse 12 Vin models: 1 000 mA (slow blow) 24 Vin models: 500 mA (slow blow) 48 Vin models: 315 mA (slow blow) (The need of an external fuse has to be assessed in the final application.) Input Filter Internal Capacitor Output Specifications Voltage Set Accuracy 1% max. Regulation - Input Variation (Vmin - Vmax) single output models: 0.2% max. dual output models: 0.2% max. - Load Variation (0 - 100%) single output models: 1% max. dual output models: 1% max. (Output 1) 1% max. (Output 2) - Cross Regulation dual output models: 5% max. (25% / 100% asym. load) Ripple and Noise - 20 MHz Bandwidth 75 mVp-p typ. Capacitive Load - single output 3.3 Vout models: 3 300 F max. 5 Vout models: 1 680 F max. 9 Vout models: 1 000 F max. 12 Vout models: 820 F max. 15 Vout models: 680 F max. 24 Vout models: 220 F max. - dual output 5 / -5 Vout models: 1 000 / 1 000 F max. 12 / -12 Vout models: 470 / 470 F max. 15 / -15 Vout models: 330 / 330 F max. Minimum Load Not required Temperature Coefficient 0.02 %/K max. Start-up Time 10 ms typ. / 20 ms max. Short Circuit Protection Continuous, Automatic recovery Output Current Limitation 130 - 230% of Iout max. 170% typ. of Iout max. Transient Response - Response Time 500 s typ. (25% Load Step) Safety Specifications Safety Standards - IT / Multimedia Equipment Designed for EN 62368-1 (no certification) EMC Specifications EMI Emissions - Conducted Emissions EN 55032 class A (with external filter) EN 55032 class B (with external filter) - Radiated Emissions EN 55032 class A (with external filter) EN 55032 class B (with external filter) www.tracopower.com/overview/tec2wi External filter proposal: All specifications valid at nominal voltage, full load and +25C after warm-up time unless otherwise stated. Page 2 / 4 www.tracopower.com April 27, 2020