TEN 40-1215E TRACO Power

DC/DC Converter TEN 40E Series, 40 Watt Developed to maximize quality in a cost efficient design Excellent temperature capabilities 2 x 1 metal package (6-side shielded) Wide 2:1 input voltage range: 9-18, 18-36, 36-75 VDC UL 62368-1 IEC 62368-1 Minimal heat development due to high efficiencies up to 93% The TEN 40E is rounding out Traco Powers existing 40 Watt product range. Driven by current market trends this series was developed to maximize quality Operating temperature range -40 to and cost efficiency in one product. Due to a new design approach the TEN 40E +85C thus offers a cost efficient solution with not only no concession on quality or re- liability but even improved specifications compared to its predecessor. It comes 1600 VDC I/O-isolation in a standard 2 x 1 metal package with a 2:1 input voltage range. High effi- Remote On/Off and Trim function ciencies of up to 93% allow for an operating temperature range (natural con- vection) of -40 to +70C without power derating (model dependent). Certified Protection against short circuit, according to the latest IT standard (IEC/EN/UL 62368-1) and equipped with overvoltage and overtemperature additional features like remote on/off function and protection against short cir- 3-year product warranty cuit, overvoltage and over temperature the TEN 40E series is suitable for many industrial applications. Models Order Code Input Voltage Output 1 Output 2 Efficiency Range Vnom Imax Vnom Imax typ. TEN 40-1210E 3.3 VDC 12 200 mA 89 % TEN 40-1211E 5 VDC 8 000 mA 90 % TEN 40-1212E 12 VDC 3 333 mA 91 % TEN 40-1213E 9 - 18 VDC 15 VDC 2 666 mA 91 % (12 VDC nom.) TEN 40-1215E 24 VDC 1 666 mA 90 % TEN 40-1222E +12 VDC 1 666 mA 12 VDC 1 666 mA 90 % TEN 40-1223E +15 VDC 1 333 mA 15 VDC 1 333 mA 90 % TEN 40-1225E +24 VDC 833 mA 24 VDC 833 mA 91 % TEN 40-2410E 3.3 VDC 12 200 mA 90 % TEN 40-2411E 5 VDC 8 000 mA 92 % TEN 40-2412E 12 VDC 3 333 mA 92 % TEN 40-2413E 18 - 36 VDC 15 VDC 2 666 mA 93 % (24 VDC nom.) TEN 40-2415E 24 VDC 1 666 mA 91 % TEN 40-2422E +12 VDC 1 666 mA 12 VDC 1 666 mA 91 % TEN 40-2423E +15 VDC 1 333 mA 15 VDC 1 333 mA 91 % TEN 40-2425E +24 VDC 833 mA 24 VDC 833 mA 91 % TEN 40-4810E 3.3 VDC 12 200 mA 90 % TEN 40-4811E 5 VDC 8 000 mA 91 % TEN 40-4812E 12 VDC 3 333 mA 92 % TEN 40-4813E 36 - 75 VDC 15 VDC 2 666 mA 92 % (48 VDC nom.) TEN 40-4815E 24 VDC 1 666 mA 92 % TEN 40-4822E +12 VDC 1 666 mA 12 VDC 1 666 mA 91 % TEN 40-4823E +15 VDC 1 333 mA 15 VDC 1 333 mA 91 % TEN 40-4825E +24 VDC 833 mA 24 VDC 833 mA 92 % Page 1 / 4 www.tracopower.com October 9, 2020TEN 40E Series, 40 Watt Options TEN-HS1 - Optional Heat Sink: www.tracopower.com/products/ten-hs1.pdf on demand - Models with factory assembled heat-sink (backorder with MOQ - Models with inverse remote control non stocking item) Input Specifications Input Current - At no load 12 Vin models: 20 mA typ. 24 Vin models: 15 mA typ. 48 Vin models: 10 mA typ. Surge Voltage 12 Vin models: 25 VDC max. (1 s max.) 24 Vin models: 50 VDC max. (1 s max.) 48 Vin models: 100 VDC max. (1 s max.) Under Voltage Lockout 12 Vin models: 7 VDC min. / 8 VDC typ. / 8.8 VDC max. 24 Vin models: 15 VDC min. / 16 VDC typ. / 17.5 VDC max. 48 Vin models: 32 VDC min. / 33 VDC typ. / 35 VDC max. Recommended Input Fuse 12 Vin models: 8 000 mA (fast acting) 24 Vin models: 4 000 mA (slow blow) 48 Vin models: 2 000 mA (slow blow) (The need of an external fuse has to be assessed in the final application.) Input Filter Internal Pi-Type Output Specifications Output Voltage Adjustment 10% to +20% (15 & 24 Vout models) 10% (other models) (Single models only) (By external trim resistor) www.tracopower.com/overview/ten40e See application note: Output power must not exceed rated power Voltage Set Accuracy 1% max. Regulation - Input Variation (Vmin - Vmax) single output models: 0.2% max. - Load Variation (0 - 100%) single output models: 0.3% max. dual output models: 0.5% max. (Output 1) 0.5% max. (Output 2) - Cross Regulation dual output models: 5% max. (25% / 100% asym. load) Ripple and Noise - single output 3.3 Vout models: 75 mVp-p typ. (20 MHz Bandwidth) 5 Vout models: 75 mVp-p typ. 12 Vout models: 100 mVp-p typ. 15 Vout models: 100 mVp-p typ. 24 Vout models: 150 mVp-p typ. - dual output 12 / -12 Vout models: 100 / 100 mVp-p typ. 15 / -15 Vout models: 100 / 100 mVp-p typ. 24 / -24 Vout models: 150 / 150 mVp-p typ. Capacitive Load - single output 3.3 Vout models: 22 000 F max. 5 Vout models: 12 000 F max. 12 Vout models: 2 000 F max. 15 Vout models: 1 300 F max. 24 Vout models: 490 F max. - dual output 12 / -12 Vout models: 980 / 980 F max. 15 / -15 Vout models: 630 / 630 F max. 24 / -24 Vout models: 250 / 250 F max. Minimum Load Not required Temperature Coefficient 0.02 %/K max. Start-up Time 30 ms typ. / 60 ms max. All specifications valid at nominal voltage, full load and +25C after warm-up time unless otherwise stated. Page 2 / 4 www.tracopower.com October 9, 2020