TEN 6-4813N TRACO Power

DC/DC Converters TEN 6N Series, 6 Watt CB Scheme IEC 60950-1 Features UL 60950-1 2:1 input voltage range High efcfi iency Operating temperature range 40C to +85C No minimum load required Input filter meets EN 55022, class A Overload protection I/O-isolation 1500 VDC DIP-24 plastic package The TEN-6N series is designed for an optimized cost/performance ratio of Industry standard pinout DC/DC converters with output power of 6 Watt. General features like no minimum load requirement, overload protection, internal 3-year product warranty lfi ter for EN55022 class A and high efcfi iency make these converters easy to design in. With the popular DIP-24 standard package they are also a drop in replacement for many cost critical applications. Models Order code Input voltage range Output voltage Output current max. Efficiency typ. TEN 6-1210N 3.3 VDC 1200 mA 75 % TEN 6-1211N 5 VDC 1200 mA 78 % TEN 6-1212N 12 VDC 500 mA 82 % TEN 6-1213N 9 18 VDC 15 VDC 400 mA 82 % TEN 6-1215N (12 VDC nominal) 24 VDC 250 mA 84 % TEN 6-1221N 5 VDC 500 mA 78 % TEN 6-1222N 12 VDC 250 mA 82 % TEN 6-1223N 15 VDC 200 mA 82 % TEN 6-2410N 3.3 VDC 1200 mA 77 % TEN 6-2411N 5 VDC 1200 mA 80 % TEN 6-2412N 12 VDC 500 mA 84 % TEN 6-2413N 18 36 VDC 15 VDC 400 mA 84 % TEN 6-2415N (24 VDC nominal) 24 VDC 250 mA 84 % TEN 6-2421N 5 VDC 500 mA 80 % TEN 6-2422N 12 VDC 250 mA 84 % TEN 6-2423N 15 VDC 200 mA 84 % TEN 6-4810N 3.3 VDC 1200 mA 77 % TEN 6-4811N 5 VDC 1200 mA 80 % TEN 6-4812N 12 VDC 500 mA 84 % TEN 6-4813N 36 75 VDC 15 VDC 400 mA 84 % TEN 6-4815N (48 VDC nominal) 24 VDC 250 mA 84 % TEN 6-4821N 5 VDC 500 mA 80 % TEN 6-4822N 12 VDC 250 mA 84 % TEN 6-4823N 15 VDC 200 mA 84 % DC/DC Converters TEN 6N Series 6 Watt Input Specifications Input current at no load 12 Vin models: 40 mA typ. 24 Vin models: 20 mA typ. 48 Vin models: 10 mA typ. Input current at full load 12 Vin, 3.3VDC models: 440 mA typ. 12 Vin other models: 610 mA typ. 24 Vin, 3.3VDC models: 220 mA typ. 24 Vin other models: 300 mA typ. 48 Vin, 3.3VDC models: 110 mA typ. 48 Vin other models: 150 mA typ. Recommended input fuse (slow blow) 12 Vin models: 1500 mA 24 Vin models: 700 mA 48 Vin models: 350 mA Start-up voltage / under voltage shut down 12 Vin models: 9.0 VDC / 8.5 VDC (or lower) 24 Vin models: 18 VDC / 16 VDC (or lower) 48 Vin models: 36 VDC / 35 VDC (or lower) Surge voltage (1 sec. max.) 12 Vin models: 25 V max. 24 Vin models: 50 V max. 48 Vin models: 100 V max. Conducted noise internal filter to meet EN 55022 class A Output Specifications Voltage set accuracy 2 % Regulation Input variation Vin min. to Vin max. 0.5 % max. Load variation 0 100 % single output models: 1.2 % max. dual output models balanced load: 1.2 % max. dual output models 50%/100% unbalanced load: 3.0 % max. Minimum load not required Temperature coefficient 0.02 %/K Ripple and noise (20 MHz Bandwidth) 80 mVp-p max. Dynamic load response (change from 75 % to 100 % load) 3 % peak variation typ. 300 S response time typ. Current limitation 145 % of Iout max. typ., constant power Short circuit protection continuous, automatic recovery Capacitive load 3.3 & 5.0 VDC models: 470 F max. 12 & 15 VDC models: 100 F max. 24 VDC models: 47 F max. dual output models: 100 F max. (each output) General Specifications Temperature ranges Operating 40C to +85C Case temperature +100C max. Storage 50C to +125C Derating 3.3 & 5.0 VDC models: 2.5 %/K above +60C other models: 3.3 %/K above +70C Humidity (non condensing) 95 % rel H max. Reliability, calculated MTBF (MIL-HDBK-217F, at +25C, ground benign) >1 Mio. h Isolation voltage (60 sec.) Input/Output 1500 VDC (functional insulation) Isolation capacitance Input/Output (100 KHz, 1 V) 1000 pF typ. Isolation resistance Input/Output (500 VDC) >1000 M Ohm Switching frequency 330 kHz typ. All specicfi ations valid at nominal input voltage, full load and +25C after warm-up time unless otherwise stated.