DC/DC Converters THL 6WISM Series, 6 Watt CB Scheme Features 226037 IEC 60950-1 Compact design in SMD package Ultra wide 4:1 input voltage range Fully regulated outputs I/O isolation 1500 VDC Operating temp. range 40C to +75C Short circuit protection Input filter to meet EN 55022, class A Qualiefi d for leadfree reflow solder process 3-year product warranty The THL 6WISM series is a family of compact 6 W dc/dc-converters with 4:1 input voltage ranges. The product is available in SMD-package which is 31% smaller than a standard DIP-24 package. The internal filter to meet EN55022 Class A without external components makes these converters easy to design in. They come with remote On/Off and short circuit protection. THL 6WISM converter is an excellent solution for data- and telecom applications and for instrumentation and industrial electronics. Models Order code Input voltage range Output voltage Output current max. Efficiency typ. THL 6-2410WISM 3.3 VDC 1450 mA 76 % THL 6-2411WISM 5.0 VDC 1200 mA 79 % THL 6-2412WISM 12 VDC 500 mA 83 % THL 6-2413WISM 9 36 VDC 15 VDC 400 mA 83 % THL 6-2415WISM (nominal 24 VDC) 24 VDC 250 mA 83 % THL 6-2421WISM 5 VDC 600 mA 82 % THL 6-2422WISM 12 VDC 250 mA 83 % THL 6-2423WISM 15 VDC 200 mA 83 % THL 6-4810WISM 3.3 VDC 1450 mA 76 % THL 6-4811WISM 5.0 VDC 1200 mA 79 % THL 6-4812WISM 12 VDC 500 mA 83 % THL 6-4813WISM 18 75 VDC 15 VDC 400 mA 83 % THL 6-4815WISM (nominal 48 VDC) 24 VDC 250 mA 83 % THL 6-4821WISM 5 VDC 600 mA 82 % THL 6-4822WISM 12 VDC 250 mA 83 % THL 6-4823WISM 15 VDC 200 mA 83 % DC/DC Converters THL 6WISM Series 6 Watt Input Specifications Input current at no load (nominal input voltage) 24 Vin models: 30 mA typ. 48 Vin models: 20 mA typ. Input current at full load (nominal input voltage) 24 Vin 3.3 VDC model: 260 mA typ. 24 Vin other models: 300 mA typ. 48 Vin 3.3 VDC model: 130 mA typ. 48 Vin other models: 150 mA typ. Surge voltage (100 msec. max.) 24 Vin models: 50 V max. 48 Vin models: 100 V max. Conducted noise EN 55022 level A, FCC part 15, level A without external components Recommended input fuse (slow blow) 24 V models: 1500 mA 48 V models: 750 mA Output Specifications Voltage set accuracy 2 % max Regulation Input variation Vin min. to Vin max. 1.0 % max. Load variation 15 100 % 1.2 % max. Minimum load 15 % of rated max current (operation at lower load condition is safe but a higher output ripple will be experienced) Temperature coefficient 0.02 %/K Ripple and noise (20 MHz bandwidth) 100 mVp-p max. Transient response (25 % load step change) Recovery time 300 s typ. Deviation 3 % typ. Short circuit protection continuous, automatic recovery Maximum capacitive load 3.3 & 5 VDC models: 330 F 12, 15 & 24 VDC models: 100 F 5,12 & 15 VDC models: 100 F (each output) General Specifications Temperature Operating (convection cooling 50 LFM, 0.25 m/s) 40C to +80C Storage 50C to +125C Case +105C max. Load derating (convection cooling 50 LFM, 0.25 m/s) 3.3 & 5.0 VDC models: 2.2 %/K above +55C other output models: 2.5 %/K above +60C Humidity (non condensing) 95 % Reliability, calculated MTBF (MIL-HDBK-217F, at +25C, ground benign) >350000 h Isolation voltage Input/Output 60 sec. 1500 VDC 1 sec. 1800 VDC Isolation capacitance Input/Output (100 kHz, 1 V) 1500 pF max. Isolation resistance Input/Output (500 VDC) >1 GOhm Safety standard IEC/EN 60950-1, UL 60950-1 Certification documents www.tracopower.com/overview/thl6wism Switching frequency 330 kHz Altitude during operation 5000 m max. (16400 ft) approved Remote On/Off On: 2.5 to 50 VDC or open circuit Off: 0.7 to +0.8 VDC Off stand by input current 10 mA max. Environmental compliance Reach www.tracopower.com/info/reach-declaration.pdf RoHS RoHS directive 2011/65/EU All specicfi ations valid at nominal input voltage, full load and +25C after warm-up time unless otherwise stated.