TOP 200-124C TRACO Power

AC/DC Power Supply TOP 200 Series, 200 Watt Highest power density in 5.0 x 3.0 footprint Supplies 200 W (convection cooling ) Highest efficiency up to 95% Operating temperature range 25C to +70C Universal input 85 264 VAC Compliance with EN 61000-3-2 Power Back immunity Low leakage current Protection class l and class ll UL 60950-1 IEC 62368-1 3-year product warranty The new TOP 200 Series AC/DC Power Supplies feature the highest power rat- ing in the industry standard 3.0 x 5.0 (76.2 x 127 mm) footprint. They can supply up to 200 W output power with convection cooling over an industrial op- erating temperature range of 25C to +70C. This performance could be real- ized by a state of the art design providing an extremely high efficiency of >90 % which eliminates the need for a dedicated power supply cooling fan. Compliance with global safety and EMC standards qualify these power supplies for worldwide markets. Approved for Class l and Class ll applications, these switchers are suitable for industrial and IT systems but also for consumer prod- ucts. High reliability is provided by use of industrial quality grade components and an excellent thermal management. This product offers an interesting power supply solution for many space and cost critical applications in commercial and industrial electronic equipment. Models Order Code Output Power Output Voltage Output Current Efficiency max. nom. max. typ. TOP 200-112 12 VDC 16 000 mA 93 % TOP 200-115 15 VDC 13 000 mA 93 % 200 W TOP 200-124 24 VDC 8 300 mA 95 % TOP 200-148 48 VDC 4 200 mA 95 % Options on demand (backorder with MOQ - Encased version: www.tracopower.com/overview/top200c non stocking item) Page 1 / 4 www.tracopower.com September 9, 2021TOP 200 Series, 200 Watt Input Specifications Input Voltage 85 - 264 VAC (Full Range) Input Frequency 47 - 63 Hz Power Consumption - At no load 3 700 mW max. Input Inrush Current - At 230 VAC 40 A max. Power Factor - At 230 VAC 0.98 min. (Active Power Factor Correction) Input Protection T 4 A (Internal Fuse in L & N) Recommended Input Fuse 6 000 mA (slow blow) (The need of an external fuse has to be assessed in the final application.) Output Specifications Voltage Set Accuracy 3% max. Regulation - Input Variation (Vmin - Vmax) 1% max. - Load Variation (0 - 100%) 1% max. Ripple and Noise 12 VDC model: 120 mVp-p max. (20 MHz Bandwidth) 15 VDC model: 120 mVp-p max. 24 VDC model: 120 mVp-p max. 48 VDC model: 150 mVp-p max. Capacitive Load 12 VDC model: 15 000 F max. 15 VDC model: 15 000 F max. 24 VDC model: 4 000 F max. 48 VDC model: 1 000 F max. Minimum Load Not required Temperature Coefficient 0.02 %/K max. Hold-up Time - At 230 VAC 10 ms min. - At 115 VAC 10 ms min. Start-up Time - At 230 VAC 2 000 ms max. - At 115 VAC 3 000 ms max. Short Circuit Protection Automatic recovery 60% typ. of Iout nom. Overload Protection Foldback Mode Output Current Limitation 120 - 150% of Iout max. Overvoltage Protection 150% typ. of Vout nom. (depending on model): 20 V typ. (12 Vout model) 25 V typ. (15 Vout model) 35 V typ. (24 Vout model) 60 V typ. (48 Vout model) Transient Response - Peak Variation 600 mV max. (10% to 90% Load Step) - Response Time 20 000 s max. (10% to 90% Load Step) Safety Specifications Safety Standards - IT / Multimedia Equipment EN 60950-1 EN 62368-1 IEC 60950-1 IEC 62368-1 UL 60950-1 - Certification Documents www.tracopower.com/overview/top200 Protection Class Class I & II (Prepared): Reinforced Insulation Pollution Degree PD 2 Over Voltage Category OVC II All specifications valid at nominal voltage, full load and +25C after warm-up time unless otherwise stated. Page 2 / 4 www.tracopower.com September 9, 2021