TXH 060-105 TRACO Power

AC/DC Power Supply TXH 060 Series, 60 Watt Enclosed power supplies with screw terminal block Universal input range 90 to 264 VAC Ready to meet ErP directive, < 0.3 W no load power consumption Adjustable output voltage 4242 VDC I/O-isolation High efficiency up to 88% Operating temperature range: 30C to +70C max. Short circuit and over voltage protection UL 62368-1 IEC 62368-1 The TXH 060 series is a family of power supplies in metal enclosure, designed for a wide range of cost critical applications. The high efficiency of up to 88% is achieved through an innovative design for free air convection cooling. This design also qualifies the power supply to meet the ErP directive ( < 0.3 W no load power consumption). The units are equiped with screw terminal blocks and are easy to install in any equipment. These power supplies have universal input and comply with European EMC standards and the Low Voltage Directive (LVD). Models Order Code Output Power Output Voltage Output Current Efficiency max. nom. (adjustable) max. typ. TXH 060-105 50 W 5 VDC (4.8 - 5.3 VDC) 10 000 mA 81 % TXH 060-112 12 VDC (11.4 - 12.6 VDC) 5 000 mA 87 % TXH 060-115 15 VDC (14.3 - 15.8 VDC) 4 000 mA 87 % 60 W TXH 060-124 24 VDC (22.8 - 25.2 VDC) 2 500 mA 88 % TXH 060-148 48 VDC (45.6 - 50.4 VDC) 1 250 mA 88 % Page 1 / 4 www.tracopower.com November 10, 2021TXH 060 Series, 60 Watt Input Specifications Input Voltage - AC Range Operational Range: 90 - 264 VAC (Full Range) Rated Range: 100 - 240 VAC (Full Range) - DC Range Operational Range: 120 - 370 VDC (Designed for, no certification) Polarity: +DC: L / DC: N Input Frequency 47 - 63 Hz Input Current - Full Load & Vin = 230 VAC 1 000 mA max. - Full Load & Vin = 115 VAC 2 000 mA max. Power Consumption - At no load 300 mW max. (Ready to meet ErP directive) Input Inrush Current - At 230 VAC 70 A max. - At 115 VAC 35 A max. (An external Thermistor has to be integreated in the circuit at the converter input L. Thermistor recommendation: 10R / 15z) Recommended Input Fuse (The need of an external fuse has to be assessed in the final application.) Output Specifications Output Voltage Adjustment 5% (By trim potentiometer) Output power must not exceed rated power Voltage Set Accuracy 2% max. Regulation - Input Variation (Vmin - Vmax) 1% max. - Load Variation (0 - 100%) 1% max. Ripple and Noise 5 VDC model: 75 mVp-p max. (w/ 0.1 F // 47 F) (20 MHz Bandwidth) 12 VDC model: 100 mVp-p max. (w/ 0.1 F // 47 F) 15 VDC model: 125 mVp-p max. (w/ 0.1 F // 47 F) 24 VDC model: 150 mVp-p max. (w/ 0.1 F // 47 F) 48 VDC model: 200 mVp-p max. (w/ 0.1 F // 47 F) Capacitive Load 5 VDC model: 10 000 F max. 12 VDC model: 5 000 F max. 15 VDC model: 4 000 F max. 24 VDC model: 2 000 F max. 48 VDC model: 1 000 F max. Minimum Load Not required Temperature Coefficient 0.02 %/K max. Hold-up Time - At 230 VAC 55 ms min. - At 115 VAC 10 ms min. Start-up Time - At 230 VAC 400 ms max. - At 115 VAC 500 ms max. Short Circuit Protection Continuous, Automatic recovery Output Current Limitation 115 - 160% of Iout max. Overvoltage Protection 105 - 145% of Vout nom. (By Zener diode) Transient Response - Response Deviation 2% max. (75% to 100% Load Step) - Response Time 500 s typ. (75% to 100% Load Step) Safety Specifications Safety Standards - IT / Multimedia Equipment EN 60950-1 EN 62368-1 IEC 60950-1 IEC 62368-1 UL 60950-1 UL 62368-1 - Certification Documents www.tracopower.com/overview/txh060 Protection Class Class I (Prepared): Connection to PE All specifications valid at nominal voltage, resistive full load and +25C after warm-up time, unless otherwise stated. Page 2 / 4 www.tracopower.com November 10, 2021