AC/DC Power Supply TXM 150 Series, 150 Watt Very compact metal cased power supplies High operating temperature up to 70C Low no load power consumption <0.5W Screw terminal block No internal fan Universal AC input, full range Active power factor correction >0.95 Withstand 300 VAC surge input for 5 s Adjustable output voltage 3-year product warranty UL 62368-1 IEC 62368-1 The TXM 150 series of 150 Watt is a family of enclosed AC/DC power supplies designed for cost critical applications. With a low profile metal case and screw terminal block connections, they are easy to install in any equipment. There are four models of single output voltages from 12 VDC to 48 VDC. These power supplies have universal input and comply with European EMC standards and the Low Voltage Directive (LVD). Models Order Code Output Power Output Voltage Output Current Efficiency max. nom. (adjustable) max. typ. TXM 150-112 12 VDC (10.8 - 13.2 VDC) 12 500 mA 86 % 150 W TXM 150-115 15 VDC (13.5 - 16.5 VDC) 10 000 mA 87 % TXM 150-124 151 W 24 VDC (21.6 - 26.4 VDC) 6 300 mA 88 % 154 W 48 VDC (43.2 - 52.8 VDC) 3 200 mA 88 % TXM 150-148 Page 1 / 4 www.tracopower.com March 23, 2021TXM 150 Series, 150 Watt Input Specifications Input Voltage - AC Range 85 - 264 VAC (Full Range) - DC Range 120 - 375 VDC (Designed for, no certification) (Surge voltage (5 s max.): 300 VAC max.) Input Frequency 47 - 63 Hz Input Current - Full Load & Vin = 115 VAC 2 000 mA max. Power Consumption - At no load 500 mW max. Input Inrush Current - At 230 VAC 45 A max. - At 115 VAC 30 A max. Power Factor - At 230 VAC 0.95 min. (Active Power Factor Correction) - At 115 VAC 0.98 min. (Active Power Factor Correction) Recommended Input Fuse (The need of an external fuse has to be assessed in the final application.) Output Specifications Output Voltage Adjustment 10% (By trim potentiometer) Output power must not exceed rated power Voltage Set Accuracy 2% max. Regulation - Input Variation (Vmin - Vmax) 0.5% max. - Load Variation (0 - 100%) 1% max. (24 & 48 VDC models) 2% max. (12 & 15 VDC models) Ripple and Noise 100 mVp-p max. (w/ 0.1 F // 10 F) (20 MHz Bandwidth) Minimum Load Not required Temperature Coefficient 0.03 %/K max. Hold-up Time - At 230 VAC 10 ms min. Start-up Time - At 230 VAC 2 000 ms max. - At 115 VAC 3 000 ms max. Start-up Overshoot Voltage 5% max. Short Circuit Protection Continuous, Automatic recovery Output Current Limitation 105 - 170% of Iout max. Overvoltage Protection 110 - 150% of Vout nom. Transient Response - Response Deviation 5% max. (75% to 100% Load Step) - Response Time 400 s typ. (75% to 100% Load Step) Safety Specifications Safety Standards - IT / Multimedia Equipment EN 60950-1 EN 62368-1 IEC 60950-1 IEC 62368-1 UL 60950-1 UL 62368-1 www.tracopower.com/overview/txm150 - Certification Documents Protection Class Class I (Prepared): Connection to PE Pollution Degree PD 2 Over Voltage Category OVC II EMC Specifications EMI Emissions - Conducted Emissions EN 55032 class B (internal filter) - Radiated Emissions EN 55032 class B (internal filter) - Harmonic Current Emissions EN 61000-3-2, class D - Voltage Fluctuations & Flicker EN 61000-3-3 All specifications valid at nominal voltage, full load and +25C after warm-up time unless otherwise stated. Page 2 / 4 www.tracopower.com March 23, 2021
