BC PERS450 Tripp Lite

Highlights BC Personal 120V 450VA 280W Standby UPS, 450VA tower 120V standby UPS Tower, USB port, 3 Outlets Maintains AC output during MODEL NUMBER: BCPERS450 power failures USB port, Status LEDs NEMA 5-15P input plug and 3 NEMA 5-15R outlets Package Includes BCPERS450 UPS System Instruction manual Description Tripp Lite's BCPERS450 standby UPS offers AC surge suppression and long lasting battery support for desktop PCs, network workstations and a wide variety of consumer and professional electronics. Uninterruptible Power Supply / UPS circuits switch to battery backup mode within milliseconds to keep connected equipment running without interruption or data loss during power failures, brownouts and overvoltages. AC surge suppression prevents connected equipment damage. USB communications port supports built-in power management and auto-shutdown features of Windows and Mac OS X or full featured monitoring and data-saving auto-shutdown options using Tripp Lite's free PowerAlert monitoring software. Features BCPERS450 small tower 120V standby UPS offers AC power protection from blackouts, brownouts, overvoltages and transient surges 450VA / 280 watt UPS output capacity Uninterruptible Power Supply / UPS operation maintains battery-derived AC output during blackouts, brownouts and overvoltages to prevent data loss and system downtime for connected equipment Built-in USB port enables data-saving unattended shutdown when used with Tripp Lite's PowerAlert software, available via FREE download from www.tripplite.com/poweralert HID-compliant USB port also enables integration with built-in power management and auto shutdown features of Windows and Mac OS X 4.6 minutes runtime at 100% load (280 watts), 15 minutes runtime at 50% load (140 watts) 30 minutes runtime for a desktop computer system consuming 80 watts continuous 3 built-in NEMA 5-15R UPS supported outlets NEMA 5-15P input connection with 6ft / 1.8m line cord 1 / 5 Network grade AC surge and lightning protection is available from all outlets Supports Tripp Lite's Watchdog system service to restore operation to locked equipment through soft reboot of application/OS or hard power off/on reboot of connected equipment, ideal for unattended kiosk applications Front panel LEDs indicate line / battery mode and battery replace status; Audible alarm with alarm cancel / self-test button Hot swappable user battery replacement Optional PDUB15 bypass PDU enable hot-swappable UPS replacement with no disruption to connected equipment Small tower housing supports desk or floor placement Specifications OVERVIEW UPC Code 037332033116 UPS Type Standby INPUT Rated input current (Maximum Load) 3.1A Nominal Input Voltage(s) Supported 120V AC UPS Input Connection Type 5-15P UPS Input Cord Length (ft.) 6 UPS Input Cord Length (m) 1.8 Recommended Electrical Service 15A 120V Input Phase Single-Phase OUTPUT Output Volt Amp Capacity (VA) 450 Output Watt Capacity (Watts) 280 Nominal Voltage Details 115v nominal output in battery mode Frequency Compatibility 60 Hz Output Voltage Regulation (Battery +/- 5% Mode) Hot-Swap PDU options PDUB15 (2U / 8 5-15R outlets) Output AC Waveform (AC Mode) Sine wave Output AC Waveform (Battery PWM sine wave Mode) 2 / 5