Highlights BC Pro 120V 1050VA 705W Standby UPS, Tower, 1050VA / 1.05kVA tower 120V USB port, 6 Outlets standby UPS Maintains AC output during power MODEL NUMBER: BCPRO1050 failures USB port, Front panel status LEDs, 97% efficient NEMA 5-15P input plug and 6 NEMA 5-15R outlets Package Includes BCPRO1050 UPS System USB cable Instruction manual Description Tripp Lite s BCPRO1050 standby UPS offers AC surge suppression and long lasting battery support for desktop PCs, network workstations and a wide variety of consumer and professional electronics. Uninterruptible Power Supply / UPS circuits switch to battery backup mode within milliseconds to keep connected equipment running without interruption or data loss during power failures, brownouts and overvoltages. AC surge suppression prevents connected equipment damage. USB communications port supports full featured monitoring and data-saving auto-shutdown options using Tripp Lite s free PowerAlert monitoring software. Features BCPRO1050 tower 120V standby UPS offers AC power protection from blackouts, brownouts, overvoltages and transient surges 1050VA / 705 watt UPS output capacity Uninterruptible Power Supply / UPS operation maintains battery-derived AC output during blackouts, brownouts and overvoltages to prevent data loss and system downtime for connected equipment Built-in USB port enables data-saving unattended shutdown when used with Tripp Lite s PowerAlert software, available via FREE download from www.tripplite.com/poweralert 7 minutes runtime at 100% load (705 watts), 23 minutes runtime at 50% load (355 watts) 107 minutes runtime for a desktop computer system consuming 80 watts continuous 6 built-in NEMA 5-15R UPS supported outlets NEMA 5-15P input connection with 6ft / 1.8m line cord Network grade AC surge and lightning protection is available from all outlets 97% line mode efficiency rating uses less energy and BTU emissions Front panel LEDs indicate line / battery mode, low battery, replace battery status Audible alarm with alarm cancel / self-test button Hot swappable user battery replacement Optional PDUB15 bypass PDU enables hot-swappable UPS replacement with no disruption to connected equipment Tower housing supports desk or floor placement Specifications 1 / 5 OUTPUT Output Volt Amp Capacity (VA) 1050 Output kVA Capacity (kVA) 1.05 Output Watt Capacity (Watts) 705 Nominal Output Voltage(s) 110V 115V 120V Supported Nominal Voltage Details 115v nominal output in battery mode Frequency Compatibility 60 Hz Output Voltage Regulation (Battery +/- 5% Mode) Output Receptacles (6) 5-15R Hot-Swap PDU options PDUB15 (2U / 8 5-15R outlets) Output AC Waveform (AC Mode) Sine wave Output AC Waveform (Battery Mode) PWM sine wave INPUT Rated input current (Maximum Load) 6.4A Nominal Input Voltage(s) Supported 120V AC UPS Input Connection Type 5-15P Right-Angled Input Circuit Breakers 15A UPS Input Cord Length (ft.) 6 UPS Input Cord Length (m) 1.8 Recommended Electrical Service 15A 120V Input Cord Length (ft.) 6 Input Cord Length (m) 1.83 Input Phase Single-Phase BATTERY Full Load Runtime (min.) 7 min. (705w) Half Load Runtime (min.) 23 min. (355w) DC System Voltage (VDC) 18 Battery Recharge Rate (Included Less than 4 hours from 10% to 90% Batteries) Internal UPS Replacement Battery (quantity 3) RBC52 Cartridge Battery Access Battery access door 2 / 5