Highlights Wireless Access Point Enclosure with Lock - Designed for Cisco WAPs, but Surface-Mount, ABS Construction, 11 x 11 in. accommodates equipment from MODEL NUMBER: EN1111 most vendors Rugged ABS plastic housing protects router/modem/WAP from theft or tampering Transparent to wireless signals, ensuring an optimum Wi-Fi signal in all directions Swings away from wall or ceiling on hinge to allow easy access to equipment and cabling Comes fully assembled and ready for wall- or ceiling- mounting using included Locking enclosure protects your Wi-Fi access point against theft, damage or tampering inside offices, dorms and other indoor areas. hardware Features Applications Wall-Mount Enclosure Secures and Organizes Your Router/Modem or Wireless Access Protect a router/modem or PointProtect your indoor router/modem or Wi-Fi access point by installing it inside this SmartRack Wireless Access Point Enclosure made from impact-resistant UL 94 V-0 Classified ABS plastic. Its ideal wireless access point inside a for offices, dorms, hotels, classrooms, retail locations and other indoor areas where you need to keep Wi- Fi equipment secure, organized and out of the way. classroom, office, hotel, store, Accommodates a Wide Range of Equipment, Including Cisco WAPs, up to 542 in.Though the dorm or other indoor space from EN1111 is designed specifically to protect Cisco Wi-Fi access points, it will also house most other equipment up to 542 cubic inches (891 cubic millimeters). While rugged enough to keep your equipment damage, theft or tampering safe inside, its also transparent to wireless signals, ensuring strong Wi-Fi coverage. Convenient knockout ports allow easy cable routing through the enclosure and reduce cable clutter. Locks Securely to Help Prevent Damage, Tampering or TheftThis Wi-Fi access point enclosure Package Includes swings away from the wall or ceiling on a sturdy hinge, allowing easy access to equipment and cabling Wireless Access Point during installation and maintenance. It locks securely with the included keys to protect its contents against theft, tampering, dust and other contaminants. Vents on each end allow cool air to flow freely through the Enclosure with Lock, 11 x 11 in. enclosure to prevent equipment from overheating. Easy to Mount with the Included HardwareThe EN1111 comes fully assembled and ready for horizontal (2) M6 screws, 1 in. or vertical mounting on a wall or ceiling with the included installation hardware. It is designed for Cisco (2) M6 trusshead screws, 0.25 WAPs, but the included universal T-bar bracket will accommodate a wide variety of equipment from other brands. Pre-cut openings allow for precise positioning over wall outlets. in. (4) M6 flathead screws, 0.25 in. Cable tie (4) Nylon spacers T-bar bracket (2) Keys Installation guide Specifications 1 / 2OVERVIEW UPC Code 037332217813 Rack Type Enclosure PHYSICAL Color White Maximum Device Depth (cm) 11.18 Maximum Device Depth (in.) 4.4 Maximum Device Depth (mm) 112 Rack Height 0U Shipping Dimensions (hwd / cm) 30.70 x 30.10 x 13.90 Shipping Dimensions (hwd / in.) 12.08 x 11.85 x 5.47 Shipping Weight (kg) 1.90 Shipping Weight (lbs.) 4.19 Unit Dimensions (cm) 28 x 28 Unit Dimensions (hwd / cm) 28.2 x 28.2 x 11.2 Unit Dimensions (hwd / in.) 11.1 x 11.1 x 4.4 Unit Dimensions (in.) 11 x 11 Unit Weight (kg) 1.50 Unit Weight (lbs.) 3.3 SPECIAL FEATURES Built-in Cable Management No WARRANTY Product Warranty Period 5-year limited warranty (Worldwide) 2021 Tripp Lite. All rights reserved. All product and company names are trademarks or registered trademarks of their respective holders. Use of them does not imply any affiliation with or endorsement by them. Tripp Lite has a policy of continuous improvement. Specifications are subject to change without notice. Tripp Lite uses primary and third-party agencies to test its products for compliance with standards. See a list of Tripp Lite s testing agencies: