Highlights
Gigabit PoE+ Midspan Active Injector - IEEE
Saves money by delivering 30W
802.3at/802.3af, 30W, 1 Port
of power + data up to 328 ft.
MODEL NUMBER: NPOE-30W-1G
through existing cabling
Extends power + data to any
PoE or PoE+ device installed
where no AC outlet is available
Supports Gigabit Ethernet data
transfer speeds up to 1000
Mbps
Quick and easy plug-and-play
installation with no configuration
necessary
Compact, hand-sized plastic
housing ready for mounting on
any smooth surface
PoE+ injector uses existing Cat5e/6/6a cable to supply power to a PoE device connected to a non-PoE
switch.
Applications
Features
Add a security camera to your
Adds PoE Devices to Your LAN Without a PoE SwitchNow you can add a surveillance camera,
network without upgrading to a
wireless access point, VoIP phone or other PoE (Power over Ethernet) device to your home or office
network, even if your network switch doesnt support PoE. Instead of making an expensive upgrade to a
new PoE switch
PoE switch, you can use this single-port PoE+ injector to send 30 watts of power, as well as Gigabit
Ethernet data, through your existing Cat5e/6/6a cabling.
Install a touchscreen kiosk or
Saves You Time and Money on Unnecessary Equipment UpdatesThis compact PoE plus injector
VoIP phone in an area without a
delivers 10/100/1000 Mbps of data and up to 30 watts of power using existing Cat5e/6/6a cables. That
means, in addition to not buying a new PoE network switch, you also dont need to install new AC power
standard power connection
lines and electrical outlets. This cost-effective midspan injector sends DC power and Ethernet data
through your Ethernet cable, cutting down on cable clutter, equipment costs and installation time and
Fill in Wi-Fi dead spots in your
labor.
office with a wireless access
Expand Your Wireless Network Up to 328 ft.The NPOE-30W-1G delivers both power and data to any
IEEE 802.3at (PoE+) or IEEE 802.3af (PoE) device up to 100 meters (328 feet) away. This allows you to
point connected to your LAN
install a device in a building lobby, on a ceiling, inside a warehouse or anywhere else an AC power outlet
is unavailable. The PoE+ injector supports full-duplex 2 Gbps communication for sending and receiving
data simultaneously. It also protects your device against short circuits, overloads and power surges. System Requirements
Simple Plug-and-Play Installation Has Your Device Connected in MinutesNo configuration or
Device that meets IEEE 802.3af
software is required to add the NPOE-30W-1G to your LAN. Just connect your switch or network jack to
the shielded RJ45 Data port and your PoE device to the shielded RJ45 Power + Data port using existing
or IEEE 802.3at standards
Cat5e/6/6a cable. Connect the units C14 inlet to a NEMA 5-15R outlet using the included power cord.
LEDs indicate the unit is receiving power and is ready to transmit data.
Package Includes
Designed for Installation Almost AnywhereMounting holes are featured for installing the midspan
injector on a shelf, desktop, wall or any other smooth surface with user-supplied hardware. The black
NPOE-30W-1G Gigabit PoE+
plastic housing fits in the palm of your hand, so it is small enough to hide away without interfering with
your workflow or dcor. The fanless design is ideal for silent operation.
Midspan Active Injector - IEEE
3-Year Warranty and Environmentally Responsible DesignThe NPOE-30W-1G comes with a 3-year
802.3at, 30W, 1 Port
warranty. Its manufactured in compliance with strict RoHS specifications, reflecting Tripp Lites
commitment to environmental responsibility.
Detachable C13 to NEMA 5-15P
power cord, 6 ft.
Owners manual
1 / 3
Specifications
OVERVIEW
UPC Code 037332203595
INPUT
Voltage Compatibility (VAC) 100; 110; 120; 127; 200; 208; 220; 230; 240
Input Frequency 50/60 Hz
PHYSICAL
Color Black
Primary Form Factor Desktop
Unit Dimensions (hwd / in.) 1.4 x 2.6 x 5.4
ENVIRONMENTAL
Operating Temperature Range 32 to 122 F (0 to 50 C)
Storage Temperature Range -4 to 176 F (-20 to 80 C)
Relative Humidity 10% to 90% RH, Non-Condensing
COMMUNICATIONS
Network Speed 1Gbps
IEEE Standards Supported 802.3; 802.3ab; 802.3af; 802.3at; 802.3u
CONNECTIONS
Side A - Connector 1 RJ45 (FEMALE)
Side B - Connector 1 RJ45 (FEMALE)
Network Switch Ports 10/100/1000 (RJ45)
FEATURES & SPECIFICATIONS
Technology Cat5/5e; Cat6; Cat6a
CERTIFICATIONS
Certifications Tested to CE, FCC, RoHS, REACH
WARRANTY
Product Warranty Period
3-year limited warranty
(Worldwide)
2 / 3