OMNISMART350HG Tripp Lite

Highlights OmniSmart 120V 330VA 225W UL 60601-1 330VA line interactive tower Medical Grade Line-Interactive UPS, Tower, DB9 UPS Serial Maintains sine-wave 120V MODEL NUMBER: OMNISMART350HG nominal output over an input range of 83 to 132V Professional features include serial port, hospital grade plug & outlets, built-in isolation transformer and UL60601-1 listing Input: Hospital-grade NEMA 5- 15P (120V 15A) / Output: 4 Hospital-grade NEMA 5-15R (120V) 2 line phone suppression for TEL/DSL line protection Leakage current less than 100 Description Tripp Lite s OMNISMART350HG offers medical-grade UPS protection with built-in line interactive voltage microamps regulation, intelligent monitoring and unattended shutdown capability. Hospital-grade plug & outlets, plus built-in isolation transformer with Faraday shield offers full isolation and removes common mode noise Approved for use within the equal to 100 microamps. UL 60601-1 listed as medical electrical equipment. 330VA power handling Patient Care Vicintiy capacity supports computers, inter-networking equipment and other critical loads during commercial power failures. Line interactive voltage regulation corrects brownouts as low as 83V back to normal 120V Approved to EN60601-1-2:2015 levels, saving battery reserves for use only during complete power failures. Includes, 2 line phone surge suppression and built-in DB-9 communications port that works with PowerAlert Software and cabling to & IEC60601-1-2:2014, 4th provide automatic unattended shutdown of connected network and PC applications. Edition Application Usage Package Includes This UPS contains a lead acid battery designed to be connected continuously to an AC power source, except during brief power outages. It is not intended for frequent charge/discharge cycles, such as mobile OMNI SMART 350HG Hospital cart applications where the UPS is often disconnected from the power source. Using the OMNISMART350HG in this type of application will void the battery warranty. Grade UPS System Serial cable for remote monitoring Features Warranty information Ideal UPS protection for applications in medical patient-care areas where UL 60601-1 listed electrical Instruction manual medical equipment is required Line-interactive voltage regulation corrects brownouts as low as 83V without using battery power Hospital-grade plug and outlets offer added degree of safety and reliability to input/output connections Full line isolation prevents shock potential and operational problems in sensitive electronic equipment Resistant to electrostatic discharge Supports loads up to 330VA/225 watts 46 minutes half load runtime (with 165VA load), 18 minutes full load runtime (with 330VA load) 4 protected hospital-grade outlets 6-ft. cord 1 / 5 1-DB9 serial port for network interface Complete surge protection, line isolation and EMI/RFI noise filtering 2 phone line surge suppression for modems, fax machines and other phone accessories Complete remote monitoring cabling included, PowerAlert UPS management software available via free download 4 diagnostic LEDs indicate AC present, on battery, voltage correction & battery low/replace Battery replacement door and back panel grounding lug Specifications OVERVIEW UPC Code 037332098542 UPS Type Line-Interactive INPUT Rated input current (Maximum Load) 2.3A Nominal Input Voltage(s) Supported 120V AC UPS Input Connection Type 5-15P-HG Input Circuit Breakers 3.5A UPS Input Cord Length (ft.) 6 UPS Input Cord Length (m) 1.8 Recommended Electrical Service 15A 120V Input Phase Single-Phase OUTPUT Output Volt Amp Capacity (VA) 330 Output Watt Capacity (Watts) 225 Frequency Compatibility 60 Hz Output Voltage Regulation (Line -18%, +8% Mode) Output Voltage Regulation (Battery +/- 5% Mode) Output Receptacle Details Hospital grade output receptacles Output AC Waveform (AC Mode) Sine wave Output AC Waveform (Battery PWM sine wave Mode) Nominal Output Voltage(s) 120V Supported 2 / 5