Highlights Wireless Access Point Enclosure with Lock - Designed for Cisco WAPs, but Surface-Mount, Plastic Construction, 18 x 12 in. accommodates equipment from MODEL NUMBER: EN1812 most vendors Rugged plastic housing protects router/modem/WAP from theft or tampering Transparent to wireless signals, ensuring an optimum Wi-Fi signal in all directions Swings away from wall or ceiling on hinge to allow easy access to equipment and cabling Comes fully assembled and ready for wall- or ceiling- mounting using included Locking enclosure protects your Wi-Fi access point against theft, damage or tampering inside offices, dorms and other indoor areas. hardware Features Applications Wall-Mount Enclosure Secures and Organizes Your Router/Modem or Wireless Access Protect a router/modem or PointProtect your indoor router/modem or Wi-Fi access point by installing it inside this SmartRack Wireless Access Point Enclosure made from impact-resistant UL 94 V-1 Classified PC plastic. Its ideal for wireless access point inside a offices, dorms, hotels, classrooms, retail locations and other indoor areas where you need to keep Wi-Fi equipment secure, organized and out of the way. classroom, office, hotel, store, Accommodates a Wide Range of Equipment, Including Cisco WAPs, up to 1102 in.Though the dorm or other indoor space from EN1812 is designed specifically to protect Cisco Wi-Fi access points, it will also house most other equipment up to 1102 cubic inches (18,052 cubic centimeters). While rugged enough to keep your damage, theft or tampering equipment safe inside, its also transparent to wireless signals, ensuring strong Wi-Fi coverage. Convenient knockout ports allow easy cable routing through the enclosure and reduce cable clutter. Locks Securely to Help Prevent Damage, Tampering or TheftThis Wi-Fi access point enclosure Package Includes swings away from the wall or ceiling on a sturdy hinge, allowing easy access to equipment and cabling Wireless Access Point during installation and maintenance. It locks securely with the included keys to protect its contents against theft, tampering, dust and other contaminants. Enclosure with Lock, 18 x 12 in. Easy to Mount with the Included HardwareThe EN1812 comes fully assembled and ready for horizontal or vertical mounting on a wall or ceiling with the included installation hardware. It is designed for Cisco (2) M6 screws, 1 in. WAPs, but the included shelf and universal T-bar bracket will accommodate a wide variety of equipment (2) M6 trusshead screws, 0.25 from other brands. Pre-cut openings allow for precise positioning over wall outlets. in. (4) M6 flathead screws, 0.25 in. (10) Cable ties Nylon washer (2) Nylon spacers T-bar bracket Shelf bracket (2) Keys Installation guide 1 / 2 Specifications OVERVIEW UPC Code 037332217820 Rack Type Enclosure PHYSICAL Color White Maximum Device Depth (cm) 13.03 Maximum Device Depth (in.) 5.130 Maximum Device Depth (mm) 130 Rack Height 0U Shipping Dimensions (hwd / cm) 47.50 x 32.70 x 15.60 Shipping Dimensions (hwd / in.) 18.70 x 12.87 x 6.14 Shipping Weight (kg) 3.16 Shipping Weight (lbs.) 6.97 Unit Dimensions (cm) 46 x 30 Unit Dimensions (hwd / cm) 45.5 x 30.2 x 12.9 Unit Dimensions (hwd / in.) 17.9 x 11.9 x 5.1 Unit Dimensions (in.) 18 x 12 Unit Weight (kg) 2.60 Unit Weight (lbs.) 5.73 SPECIAL FEATURES Built-in Cable Management No WARRANTY Product Warranty Period 5-year limited warranty (Worldwide) 2021 Tripp Lite. All rights reserved. All product and company names are trademarks or registered trademarks of their respective holders. Use of them does not imply any affiliation with or endorsement by them. Tripp Lite has a policy of continuous improvement. Specifications are subject to change without notice. Tripp Lite uses primary and third-party agencies to test its products for compliance with standards. See a list of Tripp Lite s testing agencies: