Highlights Mounting Clamps for Tripp Lite PS- and SS- C-clamps fit edges up to 2.25 Series Bench-Mount Power Strips - Pack of 2 inches thick on desks, tables MODEL NUMBER: PSSS2C and workbenches Built-in mounting clips accommodate Tripp Lite PS- and SS-series power strips Support for horizontal mounting no drilling required Clamps add flexibility and portability to new installations and retrofits Heavy-duty steel construction provides strength and durability Applications Clamps have built-in clips to securely mount Tripp Lite PS- and SS-series bench-mount power strips Mount power strips to the edge without the need for drilling holes. of a workbench for easy access Features to outlets C-Clamps Securely Mount Power Strips without DrillingNow its possible to mount Tripp Lite PS- and Install power strips at a trade SS-series bench-mount power strips without drilling into walls or workbenches. Sold in a pack of two, the PSSS2C C-clamps attach to the edge of a desk, table, workbench or other solid, flat surface up to 2.25 show booth without drilling inches thick. Slide the clamps onto the edge of your surface, hand tighten the adjustment knobs to secure and then snap your power strip into the built-in mounting clips. For optimal support, use at least two Mount power strips to a desk clamps for power strips 36 inches and shorter. For power strips longer than 36 inches, use an additional without damaging its surface clamp every 12 to 18 inches. Add Flexibility to Power Strip InstallationsThe PSSS2C clamps are perfect for installations where drilling mounting holes is not possible or desirable. There are no mounting fasteners, so you can Package Includes reposition the power strip installation quickly. The built-in mounting clips allow you to replace a power strip PSSS2C Mounting Clamps for without removing the clamps from the mounting surface. Made of heavy-duty steel, the clamps withstand Tripp Lite Bench-Mount Power the rigors of daily use. Strips - Pack of 2 Retrofit Existing Installations to Improve Access to OutletsYou can change the mounting of a Tripp Lite power strip you already own to improve access to the outlets or to avoid drilling new holes when relocating the strip. The built-in mounting clips are designed for use with Tripp Lite PS- and SS-series bench-mount power strips. (Compatibility with other power strips depends on the strips dimensions the mounting clips are not adjustable.) Specifications OVERVIEW UPC Code 037332241818 INPUT Input Cord Length (ft.) 0 Input Cord Length (m) 0.00 Integrated Cord Clip No 1 / 2OUTPUT Right-Angle Outlets No PHYSICAL Color Black Antimicrobial Coating No Integrated Keyhole Mounting Slots No Material of Construction Steel Shipping Dimensions (hwd / cm) 4.83 x 9.65 x 16.51 Shipping Dimensions (hwd / in.) 1.90 x 3.80 x 6.50 Shipping Weight (kg) 0.28 Shipping Weight (lbs.) 0.62 Unit Dimensions (hwd / cm) 12.19 X 4.32 X 4.06 Unit Dimensions (hwd / in.) 4.8 X 1.7 X 1.6 Unit Weight (kg) 0.25 Unit Weight (lbs.) 0.56 WARRANTY Product Warranty Period Lifetime limited warranty (Worldwide) 2021 Tripp Lite. All rights reserved. All product and company names are trademarks or registered trademarks of their respective holders. Use of them does not imply any affiliation with or endorsement by them. Tripp Lite has a policy of continuous improvement. Specifications are subject to change without notice. Tripp Lite uses primary and third-party agencies to test its products for compliance with standards. See a list of Tripp Lite s testing agencies: