Highlights
2000W PowerVerter Plus Industrial-Strength
Designed for heavy duty and
Inverter with 2 Outlets
motor loads
MODEL NUMBER: PV2000FC
12V DC input; 120V AC output;
2 outlets
2000W continuous output
Peak surge output: OverPower
(up to 1 hour)3000W, Double-
Boost (up to 10
seconds)4000W
High-efficiency power
conversion
Automatic overload protection
Package Includes
PV2000FC Inverter
Description
Instruction manual
Utilize your vehicle's battery to efficiently power office equipment on the road or power tools at a work site.
Continuously supplies up to 2000W of 120V AC power to 2 AC outlets from any 12V battery or automotive
DC source. Frequency control locks AC output at 60Hz for operating stability of motor loads. Includes a
set of high-current DC input terminals for simple, permanent installation. Highly reliable large transformer
design specializes in powering motors and other inductive loads with high-current startup needs. Built-in
RJ45 port allows connection of APS/PowerVerter Remote Switch (APSRM4)
OPTIONAL FEATURES: Optional load sense function enables automatic inverter shutoff and startup as
connected equipment is powered off and on. Front panel load sense potentiometer can be set to shut off
or turn on inverter power in response to loads of any level. Ignition Switch Control Jack connects inverter
to vehicle ignition system to automatically control inverter. Inverter ON/OFF Relay Jack connects to a
user-supplied on/off indicator for remote visual status of the operation of the inverter.
NOTE: To protect against high current draw that may occur during inverter failure, a fuse link rated at
400a should be positioned no more than 18" from the PV2000FC's battery in the positive line.
Features
Allows users to run large, motorized AC appliances from any 12V battery or automotive DC system
Converts 12V DC battery power to 120V AC power
2000W continuous output power
Peak surge output: OverPower (up to 1 hour) 3000W, Double-Boost (up to 10 seconds) 4000W
2 x NEMA 5-15/20R outlets; DC input terminals for 12V battery connection
Frequency control for operating stability
High-efficiency operation conserves batteries to prolong runtime
1 / 4 Diagnostic LEDs indicate load level (high, medium, and low) and battery charge (high, medium, and
low)
DC fusing protects inverter against overload
High-impact polycarbonate housing
RJ45 port allows connection of APS/PowerVerter Remote Switch (APSRM4)
Grounding lug properly connects the inverter system to earth ground or vehicle grounding system
Load sense function enables automatic inverter shutoff and startup as connected equipment is powered
off and on.
Specifications
MODEL TEXT
Key Benefit Need heavy-duty power on the go? No problem. The PV2000FC
Industrial-Strength Inverter offers 2 outlets and up to 2000W of continuous output
from a vehicles battery or a 12V external battery bank, making it perfect for
a work truck with industrial equipment (e.g. power tools, electric motors). Its
highly efficient operation can handle peak load requirements for equipment with
high-current startup needsup to 200% of its rated capacity.
OUTPUT
Nominal Output Voltage(s)
120V
Supported
Frequency Compatibility 60 Hz
Output Receptacles (2) 5-15R
Output (Watts) 2000
Continuous Output Capacity (Watts) 2000
Peak Output Capacity (Watts) 4000
Output Voltage Regulation Maintains PWM sine wave output voltage of 120 V AC (+/-5%)
Output Frequency Regulation 60 Hz (+/- 0.3 Hz)
Overload Protection Circuit breaker
INPUT
Recommended Electrical Service Requires 12V DC input source capable of delivering 200A for the required duration (when used at full capacity). For
automotive applications, professional hardwire installation with 400A battery system fusing is recommended
Maximum Input Amps / Watts Full continuous load - 200A at 12V DC, No load - 2.2A at 12V DC
Input Connection Type Set of 2 DC bolt-down wiring terminals
Input Cord Length Details User supplies cabling; 2/0 gauge or larger recommended
Voltage Compatibility (VDC) 12
2 / 4