Highlights
SmartPro 120V 750VA 600W Line-Interactive Sine
.75kVA / 750VA / 600W line
Wave UPS, 2U, Extended Run, Network Card
interactive 2U rack/tower UPS,
Options, LCD, USB, DB9
Sine wave output
MODEL NUMBER: SMART750RMXL2U
120V output, Corrects
brownouts and overvoltages
from 83V to 147V
0.8 Power Factor, Interactive
LCD interface
Extended runtime options up to
450W
4 post compatible mounting
accessories
95% line-mode efficiency, 2
switched load banks
USB, RS232, EPO and slot for
Network Management Card
Description
options
Tripp Lite SmartPro Line Interactive UPS with enhanced LCD interface offers network-grade power
120V NEMA 5-15P input, 6
protection for critical server, network and telecommunications equipment. Line Interactive Uninterruptible
NEMA 5-15R outlets
Power Supply (UPS) with built-in Auto-Voltage Regulation (AVR) actively corrects brownouts and
overvoltages back to usable levels while maintaining a full battery charge in case of power failure.
Package Includes
Interactive LCD interface reports UPS operating mode, detailed UPS and site-power data, plus enables a
SMART750RMXL2U UPS
variety of UPS setup and configuration options. Super-fast switchover from line to battery power occurs
System
within milliseconds to maintain operation of connected equipment without interruption or reboot. 95% line-
USB, Serial & EPO cabling
mode efficiency offers reduced heat emissions and operating costs. Network management interfaces
support communications via USB, RS-232 and slot for optional Network Management Card options. HID-
4 post installation kit
compliant USB interface enables integration with built-in power management and auto shutdown features
Owner's manual
of Windows and Mac OS X. Network communications ports enable detailed monitoring of equipment load
levels, self-test data and utility power conditions. PowerAlert UPS monitoring software is available via free
download. Switched output load banks enable scheduled and real-time remote reboot and load shedding
of select outlets. Emergency Power Off (EPO) interface. LCD display panel easily rotates for viewing in
rackmount or tower configurations. Audible alarm with push-button momentary alarm-cancel and silent-
mode configuration options. Programmable self-test. Field-replaceable, hot-swappable battery modules.
Features
Tripp Lite SMART750RMXL2U line interactive 2U rack/tower UPS with 750VA / .75kVA / 600W capacity
and extended runtime options
Line interactive UPS with Automatic Voltage Regulation (AVR) corrects brownouts and overvoltages
from 83 to 147V
NEMA 5-15P input plug; 6 NEMA 5-15R output receptacles, Two independently switched output load
1 / 6banks
Maintains uninterrupted operation of connected networking equipment during blackouts, surges,
brownouts and overvoltages
High 95% efficiency rating in line-power mode offers reduced power consumption and BTU emisssions
Internal batteries offer 20.7 minutes at 50% load (300W) and 8.5 minutes at 100% load (600W)
Extended runtime is available with optional BP24V15RT2U (limit 1), BP24V28-2U (limit 1), BP24V70-3U
(multi-pack compatible) and BP24V36-2US (multi-pack compatible); Output is reduced to 450 watts
maximum with external battery packs
External battery configurations require the use of Tripp Lite's External Battery Configuration Software
(see manual)
Hot-swappable, user-replaceable internal batteries and external battery packs can be replaced with no
disruption to connected equipment
Intelligent battery management system extends battery life
Front panel LCD monitoring screen with MODE and ENTER buttons reports operating mode with 5-bar
battery charge graphic, plus 7 selectable screens of detailed UPS and site power information
LCD interface also supports a number of advanced user setup and operating preferences
Ships with 4 post rackmount installation hardware; Optional 2POSTRMKITWM enables 2 post
rackmount/wallmount installation; Optional 2-9USTAND enables tower placement
Built-in USB, RS-232 and slot for optional Network Management Card options
Compatible with Tripp Lite UPS management card options TLNETCARD, WEBCARDLX,
SNMPWEBCARD and RELAYIOCARD
HID-compliant USB interface enables integration with built-in power management and auto shutdown
features of Windows and Mac OS X
USB & Serial ports enable data-saving unattended shutdown when used with Tripp Lite's PowerAlert
software, available via FREE download from www.tripplite.com/poweralert
Built-in Emergency Power Off (EPO) interface with cable
Specifications
OUTPUT
Output Volt Amp Capacity (VA) 750
Output Watt Capacity (Watts) 600
Output Capacity Details Output is reduced to 450 watts when used with external battery packs
Power Factor 0.8
Nominal Output Voltage(s)
110V; 115V; 120V
Supported
Nominal Voltage Details 120v nominal output in battery mode
2 / 6