Highlights
SmartPro 120V 1.5kVA 1.35kW Line-Interactive Sine
Corrects under- and overvoltages
Wave UPS, 2U Rack/Tower, WEBCARDLX Network
from 83V to 147V
Interface, LCD, USB, 8 Outlets
8 NEMA 5-15R outlets4
switchable via network interface
MODEL NUMBER: SMART1500RM2UN
Pre-installed WEBCARDLX
network interface for remote
management
Interactive LCD monitoring screen
13 min. runtime at half load; 4.5
min. at full load
Package Includes
SMART1500RM2UN SmartPro
120V 1.5kVA 1.35kW
Line-Interactive Sine Wave UPS
Pre-installed WEBCARDLX
network interface
USB cable
DB9 cable
Description
EPO cable
The SMART1500RM2UN SmartPro 120V 1.5kVA 1.35kW Line-Interactive Sine Wave UPS provides battery
Mounting hardware
backup and AC power protection against blackouts, brownouts, power surges and line noise that can damage
Owners manual
electronics or destroy data. Ideal for backing up servers and network storage devices, the SMART1500RM2UN
switches to battery mode in milliseconds to keep your connected equipment running long enough to save files and shut down safely with no data loss.
Featuring eight NEMA 5-15R outlets (four switchable) and a 10-foot power cord with 120V NEMA 5-15P input, the SMART1500RM2UN has an internal battery
that provides 13 minutes of support at half load and 4.5 minutes at full load.
The Java-free HTML5-based WEBCARDLX interface enables full remote access for site power and UPS status monitoring, configuration, control and email
notifications via secure web browser, SNMP, telnet or SSH. It supports 10/100 Mbps auto-sensing for optimum communication with an Ethernet network.
Optional EnviroSense2 modules (sold separately) provide a variety of environmental monitoring capabilities. Protocols supported include IPv4, IPv6, HTTP,
HTTPS, SMTP, SNMPv1, SNMPv2, SNMPv3, telnet, SSH, FTP, DHCP and NTP.
Automatic voltage regulation (AVR) maintains 120V nominal output over an input range of 83V to 147V without using battery power. EMI/RFI noise filtering
improves your equipments performance and prevents damage.
Features
Protects Mission-Critical Rack-Mounted Equipment
Provides fully regulated sine wave AC output for servers, network storage devices and telecom hardware
Audible alarm signals loss of utility power, overload, low battery and fault conditions
8 NEMA 5-15R outlets (4 are switchable)
10 ft. power cord with 120V NEMA 5-15P input
0.9 power factor rating
570-joule surge suppression rating
1 / 6
Reliable Battery Backup
Supports half load up to 13 min. and full load up to 4.5 min.
Internal batteries designed for hot-swap field replacement
95% line-power efficiency rating saves money in energy costs
Pre-Installed WEBCARDLX Network Interface
Network interface supports simultaneous communications via built-in USB, DB9 serial/contact-closure and pre-installed WEBCARDLX network
management card
Allows full remote access for power monitoring, configuration, control and email notifications via secure web browser, SNMP, telnet or SSH
Supports 10/100 Mbps auto-sensing for communication with an Ethernet network
Optional EnviroSense2 sensors (sold separately) enable site monitoring of temperature, humidity and contact-closure status
2 Load Banks with Switchable Outlets
Can control 4 outlets remotely to reboot equipment or shed nonessential loads
Automatic Voltage Regulation (AVR)
Maintains 120V nominal output over input range of 83V147V without using battery power
EMI/RFI Line Noise Filtering
Removes electromagnetic and radio frequency interference that can disrupt or damage equipments performance
Interactive LCD Screen
Front-panel LCD signals operating mode, load level, voltage, battery charge and estimated runtimes
Rotates for easy viewing in rack-mount or tower configurations
Communications Ports
USB and DB9 ports enable data-saving unattended shutdown when used with Tripp Lite's PowerAlert software (available via free download from
www.tripplite.com/poweralert)
EPO port supports emergency shutdown in large facilities
Versatile Installation Options
Hardware included for 4-post mounting in 2U of EIA-standard 19 in. rack
Mounts on wall or 2-post rack with optional 2POSTRMKITWM accessory
Mounts in upright tower position with optional 2-9USTAND accessory
Specifications
OUTPUT
Output Volt Amp Capacity (VA) 1500
Output kVA Capacity (kVA) 1.5
Output Watt Capacity (Watts) 1350
2 / 6