Highlights
SmartPro 120V 2.2kVA 1.92kW Line-Interactive
2.2kVA / 2200VA / 1920W line
Sine Wave UPS, 2U Rack/Tower, Extended Run,
interactive 2U rack / tower UPS;
Pre-installed Network Management Card, LCD
0.9 power factor
Display, USB, DB9 Serial
120V nominal output during
MODEL NUMBER: SMART2200RMXLN
brownouts to 83V and
overvoltages to 145V
Interactive LCD provides UPS
status information and advanced
configuration options
USB, RS232, EPO and Pre-
installed Network Management
Card interface
Expandable runtime, Hot-swap
batteries, 96% efficiency, Sine
wave output
2 independently switchable
output load banks
Description
NEMA 5-20P input; 4 NEMA 5-
Tripp Lite SmartPro Line Interactive UPS with enhanced LCD interface offers network-grade power
15/20R & 4 5-15R outlets
protection for critical server, network and telecommunications equipment. Line Interactive Uninterruptible
Power Supply (UPS) with built-in Auto-Voltage Regulation (AVR) actively corrects brownouts and
Package Includes
overvoltages back to usable levels while maintaining a full battery charge in case of power failure. Tripp
SMART2200RMXLN UPS
Lite's unique configuration excels in exceptionally poor-power environments with two separate levels of
system with Pre-installed
voltage boost to correct both slight undervoltages and severe brownout conditions. Interactive LCD
Network Management Card
interface reports UPS operating mode, detailed UPS and site-power data, plus enables a variety of UPS
interface
setup and configuration options. Super-fast switchover from line to battery power occurs within
milliseconds to maintain operation of connected equipment without interruption or reboot. 96% line-mode
USB, Serial & EPO cabling
efficiency offers reduced heat emissions and operating costs. Network management interfaces support
4 post installation kit
communications via USB, RS-232 and pre-installed Network Managment Card interface. HID-compliant
Owner's manual
USB interface enables integration with built-in power management and auto shutdown features of
Windows and Mac OS X. Network communications ports enable detailed monitoring of equipment load
levels, self-test data and utility power conditions. PowerAlert UPS monitoring software is available via free
download. Switched output load banks enable scheduled and real-time remote reboot and load shedding
of select outlets. Emergency Power Off (EPO) interface. LCD display panel easily rotates for viewing in
rackmount or tower configurations. Audible alarm with push-button momentary alarm-cancel and silent-
mode configuration options. Programmable self-test. Field-replaceable, hot-swappable battery modules.
Features
Tripp Lite SMART2200RMXLN line interactive 2U rack/tower UPS with 2200VA / 2.2kVA / 1920W
capacity and extended runtime options
1 / 6 Line interactive UPS with Automatic Voltage Regulation (AVR) corrects brownouts and overvoltages
from 83 to 145V
NEMA 5-20P input plug; 4 NEMA 5-15/20R and 4 5-15R output receptacles, Two independently
switched output load banks
Maintains uninterrupted operation of connected networking equipment during blackouts, surges,
brownouts and overvoltages
High 96% efficiency rating in line-power mode offers reduced power consumption and BTU emisssions
Internal batteries offer 12 minutes at 50% load (960W) and 4.5 minutes at 100% load (1920W)
Extended runtime is available with optional BP48V24-2U (limit 1), BP48V60RT-3U (multi-pack
compatible) and BP48V27-2US (multi-pack compatible); Output is reduced to 1600 watts maximum with
external battery packs
External battery configurations require the use of Tripp Lite's External Battery Configuration Software
(see manual)
Hot-swappable, user-replaceable internal batteries and external battery packs can be replaced with no
disruption to connected equipment
Intelligent battery management system extends battery life
Front panel LCD monitoring screen with MODE and ENTER buttons reports operating mode with 5-bar
battery charge graphic, plus 7 selectable screens of detailed UPS and site power information
LCD interface also supports a number of advanced user setup and operating preferences
Ships with 4 post rackmount installation hardware; Optional 2POSTRMKITWM enables 2 post
rackmount/wallmount installation; Optional 2-9USTAND enables tower placement
Built-in USB, RS-232 and pre-installed Network Management Card interface
HID-compliant USB interface enables integration with built-in power management and auto shutdown
features of Windows and Mac OS X
USB & Serial ports enable data-saving unattended shutdown when used with Tripp Lite's PowerAlert
software, available via FREE download from www.tripplite.com/poweralert
Built-in Emergency Power Off (EPO) interface with cable
Specifications
OUTPUT
Output Volt Amp Capacity (VA) 2200
Output kVA Capacity (kVA) 2.2
Output Watt Capacity (Watts) 1920
Output kW Capacity (kW) 1.92
Output Capacity Details Output is reduced to 1600 watts maximum when used with external battery packs
2 / 6