Highlights
SmartPro 120V 3kVA 2.88kW Line-Interactive Sine
3kVA / 3000VA / 2880W line
Wave UPS, 2U Rack/Tower, Extended Run,
interactive 2U rack/tower UPS;
Pre-installed WEBCARDLX Network Interface, LCD
0.96 power factor
Display, USB, DB9 Serial
120V nominal output during
brownouts to 83V and
MODEL NUMBER: SMART3000RMXLN
overvoltages to 145V
Interactive LCD provides UPS
status information and advanced
configuration options
Expandable runtime, Hot-swap
batteries, 96% efficiency, Sine
wave output
USB, RS232 & EPO ports,
Pre-installed WEBCARDLX
Network Interface Card
2 independently switchable
output load banks
NEMA L5-30P input; 8 NEMA
5-15/20R & 1 L5-30R outlets
This product is ENERGY STAR
Description
qualified for its ability to save
Tripp Lite SmartPro Line Interactive UPS with enhanced LCD interface offers network-grade power protection for
customers money while
critical server, network and telecommunications equipment. Line Interactive Uninterruptible Power Supply (UPS)
helping to protect the
with built-in Auto-Voltage Regulation (AVR) actively corrects brownouts and overvoltages back to usable levels
environment
while maintaining a full battery charge in case of power failure. Tripp Lite's unique configuration excels in
exceptionally poor-power environments with two separate levels of voltage boost to correct both slight
Package Includes
undervoltages and severe brownout conditions. Interactive LCD interface reports UPS operating mode, detailed
SMART3000RMXLN UPS
UPS and site-power data, plus enables a variety of UPS setup and configuration options. Super-fast switchover
system with Pre-installed
from line to battery power occurs within milliseconds to maintain operation of connected equipment without
Network Management Card
interruption or reboot. 96% line-mode efficiency offers reduced heat emissions and operating costs. Network
USB, Serial & EPO cabling
management interfaces support communications via USB port, DB9 serial port and pre-installed WEBCARDLX
4 post rackmount installation kit
network management interface card. The Java-free HTML5-based WEBCARDLX interface enables full remote
Instruction manual
access for site power and UPS status monitoring, configuration, control and email notifications via secure web
browser, SNMP, telnet or SSH. It supports 10/100 Mbps auto-sensing for optimum communication with an Ethernet network. Optional EnviroSense2 modules
(sold separately) provide a variety of environmental monitoring capabilities. Protocols supported include HTTP, HTTPS, SMTP, SNMPv1, SNMPv2, SNMPv3,
telnet, SSH, FTP, DHCP and NTP. HID-compliant USB port enables integration with built-in power management and auto shutdown features of Windows and
Mac OS X. Network communications ports enable detailed monitoring of equipment load levels, self-test data and utility power conditions. PowerAlert UPS
monitoring software is available via free download. Switched output load banks enable scheduled and real-time remote reboot and load shedding of select
outlets. Emergency Power Off (EPO) interface. LCD display panel easily rotates for viewing in rackmount or tower configurations. Audible alarm with
push-button momentary alarm-cancel and silent-mode configuration options. Programmable self-test. Field-replaceable, hot-swappable battery modules.
Features
Tripp Lite SMART3000RMXLN line interactive 2U rack/tower UPS with 3000VA / 3kVA capacity and extended runtime options
Line interactive UPS with Automatic Voltage Regulation (AVR) corrects brownouts and overvoltages from 83 to 145V
1 / 6
NEMA L5-30P input plug; 8 NEMA 5-15/20R and 1 L5-30R output receptacles, Two independently switchable output load banks
Maintains uninterrupted operation of connected networking equipment during blackouts, surges, brownouts and overvoltages
High 96% efficiency rating in line-power mode offers reduced power consumption and BTU emisssions
Internal batteries offer 10 minutes at 50% load (1440W) and 3 minutes at 100% load (2880W)
Extended runtime is available with optional BP48V24-2U (limit 1), BP48V60RT-3U (multi-pack compatible) and BP48V27-2US (multi-pack compatible)
external battery packs
External battery configurations require the use of Tripp Lite's External Battery Configuration Software (see manual)
Hot-swappable, user-replaceable internal batteries and external battery packs can be replaced with no disruption to connected equipment
Intelligent battery management system extends battery life
Front panel LCD monitoring screen with MODE and ENTER buttons reports operating mode with 5-bar battery charge graphic, plus 7 selectable screens
of detailed UPS and site power information
LCD interface also supports a number of advanced user setup and operating preferences
Ships with 4 post rackmount installation hardware; Optional 2POSTRMKITWM enables 2 post rackmount/wallmount installation; Optional 2-9USTAND
enables tower placement
Network interfaces support communications via built-in USB, DB9 serial / contact-closure and pre-installed WEBCARDLX network management card
WEBCARDLX interface allows full remote access for power monitoring, configuration, control and email notifications via secure web browser, SNMP,
telnet or SSH
Optional E2 sensors enable site monitoring of temperature, humidity and contact-closure status
HID-compliant USB port enables integration with built-in power management and auto shutdown features of Windows and Mac OS X
USB & Serial ports enable data-saving unattended shutdown when used with Tripp Lite's PowerAlert software, available via FREE download from
www.tripplite.com/poweralert
Built-in Emergency Power Off (EPO) interface with cable
Specifications
OUTPUT
Output Volt Amp Capacity (VA) 3000
Output kVA Capacity (kVA) 3
Output Watt Capacity (Watts) 2880
Output kW Capacity (kW) 2.88
Power Factor .96
Nominal Output Voltage(s)
110V; 115V; 120V
Supported
Nominal Voltage Details 120v nominal output in battery mode
Frequency Compatibility 60 Hz
Output Voltage Regulation (Line
+6%, -14%
Mode)
Output Voltage Regulation (Battery
+/-5%
Mode)
Output Receptacles (8) 5-15/20R; (1) L5-30R
Load Management Receptacles Two switchable single outlet 5-15/20R load banks
2 / 6