Highlights
SmartPro 120V 2.2kVA 1.92kW Line-Interactive
2.2kVA / 2200VA / 1920W line
Sine Wave UPS, 2U Rack/Tower, Pre-installed
interactive 2U rack/tower UPS;
Network Management Card, LCD Display, USB,
0.9 power factor
DB9 Serial
120V nominal output during
MODEL NUMBER: SMART2200RM2UN
brownouts to 83V and
overvoltages to 145V
Interactive LCD provides UPS
status information and advanced
configuration options
Hot-swap batteries, 96%
efficiency, Sine wave output
USB, RS232 & EPO ports, Pre-
installed Network Management
Card
2 independently switchable
output load banks
NEMA 5-20P input; 4 NEMA 5-
Description
15R & 4 5-15/20R outlets
Tripp Lite SmartPro Line Interactive UPS with enhanced LCD interface offers network-grade power
protection for critical server, network and telecommunications equipment. Line Interactive Uninterruptible
Package Includes
Power Supply (UPS) with built-in Auto-Voltage Regulation (AVR) actively corrects brownouts and
SMART2200RM2UN UPS
overvoltages back to usable levels while maintaining a full battery charge in case of power failure. Tripp
system with Pre-installed
Lite's unique configuration excels in exceptionally poor-power environments with two separate levels of
Network Management Card
voltage boost to correct both slight undervoltages and severe brownout conditions. Interactive LCD
USB, Serial & EPO cabling
interface reports UPS operating mode, detailed UPS and site-power data, plus enables a variety of UPS
4 post rackmount installation kit
setup and configuration options. Super-fast switchover from line to battery power occurs within
milliseconds to maintain operation of connected equipment without interruption or reboot. 96% line-mode
Instruction manual
efficiency offers reduced heat emissions and operating costs. Network management interfaces support
communications via USB, RS-232 and Pre-installed Network Management Card interface. HID-compliant
USB port enables integration with built-in power management and auto shutdown features of Windows
and Mac OS X. Network communications ports enable detailed monitoring of equipment load levels, self-
test data and utility power conditions. PowerAlert UPS monitoring software is available via free download.
Switched output load banks enable scheduled and real-time remote reboot and load shedding of select
outlets. Emergency Power Off (EPO) interface. LCD display panel easily rotates for viewing in rackmount
or tower configurations. Audible alarm with push-button momentary alarm-cancel and silent-mode
configuration options. Programmable self-test. Field-replaceable, hot-swappable battery modules.
Features
Tripp Lite SMART2200RM2UN line interactive 2U rack/tower UPS with 2200VA / 2.2kVA / 1920W
capacity
1 / 6 Line interactive UPS with Automatic Voltage Regulation (AVR) corrects brownouts and overvoltages
from 83 to 145V
NEMA 5-20P input plug; 4 NEMA 5-15R & 4 NEMA 5-15/20R output receptacles, Two independently
switchable output load banks
Maintains uninterrupted operation of connected networking equipment during blackouts, surges,
brownouts and overvoltages
High 96% efficiency rating in line-power mode offers reduced power consumption and BTU emisssions
Internal batteries offer 12 minutes at 50% load (960W) and 4.5 minutes at 100% load (1920W)
Hot-swappable, user-replaceable internal batteries can be replaced with no disruption to connected
equipment
Intelligent battery management system extends battery life
Front panel LCD monitoring screen with MODE and ENTER buttons reports operating mode with 5-bar
battery charge graphic, plus 7 selectable screens of detailed UPS and site power information
LCD interface also supports a number of advanced user setup and operating preferences
Ships with 4 post rackmount installation hardware; Optional 2POSTRMKITWM enables 2 post
rackmount/wallmount installation; Optional 2-9USTAND enables tower placement
Built-in USB, RS-232 and Pre-installed Network Management Card interface
HID-compliant USB port enables integration with built-in power management and auto shutdown
features of Windows and Mac OS X
USB & Serial ports enable data-saving unattended shutdown when used with Tripp Lite's PowerAlert
software, available via FREE download from www.tripplite.com/poweralert
Built-in Emergency Power Off (EPO) interface with cable
Specifications
OUTPUT
Output Volt Amp Capacity (VA) 2200
Output kVA Capacity (kVA) 2.2
Output Watt Capacity (Watts) 1920
Output kW Capacity (kW) 1.92
Power Factor 0.87
Nominal Output Voltage(s)
110V; 115V; 120V
Supported
Nominal Voltage Details 120v nominal output in battery mode
Frequency Compatibility 60 Hz
Output Voltage Regulation (Line
-14%, +6%
Mode)
2 / 6