T040-001-HDMI Tripp Lite

Highlights HDMI Cable Tester with Carrying Case Verifies HDMI and Mini HDMI MODEL NUMBER: T040-001-HDMI cables with A-A, A-C or C-C connections rapidly Includes main and remote units for testing installed and uninstalled cabling Switches between Continuity and Sweep test modes at the touch of a switch Widely compatible with HDMI 1.0 to 2.1 cables up to 164 ft. (50 m) Protective carrying case fits in toolbox for use at cable HDMI signal tester quickly detects short circuits and crossed connections in HDMI and Mini HDMI cables up to 164 ft. installation sites Features Applications HDMI Signal Tester: An Essential Tool for A/V Cable InstallersAvoid the problems and costly Verify the performance of HDMI troubleshooting caused by a bad HDMI cable. This HDMI tester allows you to quickly and accurately verify HDMI and Mini HDMI cables with Type A-A, A-C or C-C connectors before installing them behind walls cables in digital signage and in other tough-to-reach places. Its recommended for installers of digital signage applications and home theater systems who need to verify straight or crossed connections and open or short circuits. applications in commercial Features 2 Adjustable Test Modes: Continuity and SweepQuickly validating whether a faulty HDMI spaces cable is the issue in a malfunctioning application can save you time, trouble and money, as can detecting a faulty cable before you install it. The T040-001-HDMI flips from sync testing (Continuity) to step-by-step Test for short circuits and testing (Sweep) at the touch of a switch. It displays a 19 pin-to-pin wire map and shield connection status to ensure mapping continuity and proper configuration. The HDMI tester is compatible with HDMI versions crossed connections during 1.0 through 2.1 and cable lengths up to 164 feet (50 meters). home theater or office Easy to Store in Your Toolbox and Take to the Job SiteThis HDMI signal tester consists of a main tester unit and a removable remote identifier that are secured in a protective carrying case when not in audiovisual setups use. The tester units are powered by a standard 9-volt battery (not included). To test a cable that has already been installed, separate the two units and connect them to each end of the cable. Locate a faulty HDMI or Mini One-Year WarrantyThe T040-001-HDMI is backed by a one-year warranty, ensuring reliability and HDMI cable in an installation performance. Package Includes Main tester Remote identifier Carrying case Owners manual Specifications OVERVIEW 1 / 2UPC Code 037332206602 CONNECTIONS Side A - Connector 1 HDMI (FEMALE); MINI HDMI (FEMALE) Side B - Connector 1 HDMI (FEMALE); MINI HDMI (FEMALE) FEATURES & SPECIFICATIONS Technology HDMI WARRANTY Product Warranty Period 1-year limited warranty (Worldwide) 2019 Tripp Lite. All rights reserved. All product and company names are trademarks or registered trademarks of their respective holders. Use of them does not imply any affiliation with or endorsement by them. Tripp Lite has a policy of continuous improvement. Specifications are subject to change without notice. Tripp Lite uses primary and third-party agencies to test its products for compliance with standards. See a list of Tripp Lite's testing agencies: