MPT-250C Wire Crimp Pull Tester The MPT-250C is a Motorized Tensile Wire Crimp Pull Tester used to test a crimp contacts or ter- minals tensile strength. The unit has a range of 2.5 lbf to 250 lbf and a full color LCD touchscreen interface. Includes data capture capability for exporting test data to a PC via USB or RS-232. The MPT-250C meets UL, ISO, SAE, MIL, and ASTM tensile test requirements. Features and Specifications Standard Accessories 2 Test Types: Pull to Fail and Force Hold Self-Tightening Cam-Type (Contact) Grip (P/N 15-3202C) Data Capture (measures continuous and peak force values) Heavy-Duty Swivel Lockdown Upper Grip (P/N 15-3046) Compact / High Stability Profile Custom Fit, Foam Lined, HardShell Shipping / Travel Case Intuitive Full Color Touchscreen LCD User Interface Optional Accessories Easy Setup, Operation, and Grip Change Ring Terminal Grip (P/N 15-0066C) Force Measurement Range: 2.5 250.0 lbf (113kgf or Miniature Contacts Grip (P/N 15-3314) 1112.0N) Force Measurement Resolution: 0.1 (lbf, kgf, N) Slotted Terminal Grip (P/N 15-3087C) Force Measurement Accuracy: +/- 0.5% Full Scale Safe-T-Cable Grip Set (P/N 15-3318) Force Readout in (lbf, kgf, N) Customized Grips are available for specific applications Safe Force Overload: 150% of Full Scale Physical Pull Rate Speeds: 1 to 10 inches per minute (inch / min) Weight 20 lbs (less options) Pull Rate / Speed Accuracy: 1-5 +/- 0.125 inch/min, Shipping Weight 25 lbs (with typical / standard grips) 6-10 +/- 0.250 inch/min Accomodates Most 10 AWG - 26 AWG Wire Base Dimensions: 13.3 Wide x 6 High x 11 Deep Communication Ports: Serial RS-232 (DB9 female connector), USB 2.0 Calibration Po wer Requirements: IEC Connector, 100 240VAC, 50/60Hz, New units are supplied with a Certificate of Calibration 25 Watts maximum Factory Calibration available External Fuse Type and Rating: Type 3AG (6.3 X 32mm) 1A time delay, 250VAC Copyright 2017 Daniels Manufacturing Corporation ALL RIGHTS RESERVED WWW.DMCTOOLS.COM PH: (407) 855-6161 FAX: (407) 855-6884 MINIMUM TENSILE STRENGTH REQUIREMENT CONDUCTOR SIZE UL 486A CAPACITY TYPICAL MIL-SPEC AWG (REFERENCE) (COMMERCIAL STANDARD) (AS22520, AS7928, ETC) AWG Pounds Newtons Pounds Newtons 26 3 13.4 7 31.2 24 5 22.3 10 44.5 22 8 35.6 15 66.8 20 13 57.9 19 84.6 18 20 89.0 38 169.1 16 30 133.5 50 222.5 14 50 222.5 70 311.5 12 70 311.5 110 489.5 10 80 356.0 150 667.5 MPT-250C STANDARD AND OPTIONAL GRIPS 15-3202C 15-3046 15-3318 Standard Contact Grip Standard Wire Grip Optional Terminal Lugs, Machined Contacts Heavy-Duty Swivel Safety Cable Grip Set Lockdown Upper Grip 15-0066C 15-3087C 15-3314 MPT-VF Optional Contact Grip Optional Contact Grip Optional Contact Grip Optional Accessory Ring Terminals Terminal Lugs, Miniature Contacts Verification Fixture Machined Contacts Copyright 2017 Daniels Manufacturing Corporation ALL RIGHTS RESERVED WWW.DMCTOOLS.COM PH: (407) 855-6161 FAX: (407) 855-6884